Putting swivel studs on the side of the rifle.

MRP

CGN Regular
Rating - 100%
3   0   0
Location
BC 7-15
Looking for reports from those that ues it before I make the holes. I put 8 to 12 k on and always looking for a more comfortable way to carry.
 
QD sling cups maybe worth looking into. GrovTec is the brand I have used. Very comfortable setup for cross body carry on opposite sides of the rifle. For example: if you are right handed, mount one cup on the forend left past where your support hand grasps, then another on the right side near the butt in the approximate middle of the stock. Then you can adjust your sling so you can carry it locked in over your body and still have room to mount the rifle without taking it off. Slick! This way the bolt handle/ mag/ trigger guard can never dig into your body.
 
Works well, just make sure the studs on the opposite side of the bolt handle. Not many shooters go this route and I have probably removed more side studs and plugged holes than installed side studs.

And no, the studs don't poke into your back, the ones on your current rifle don't poke into your back now do they. At one time slings were used when shooting the rifle, not just as a carrying accessory. Side mounted slings don't work well for shooting aids but make carrying comfortable.
 
For example: if you are right handed, mount one cup on the forend left past where your support hand grasps, then another on the right side near the butt in the approximate middle of the stock. Then you can adjust your sling so you can carry it locked in over your body and still have room to mount the rifle without taking it off. Slick!
similar to the Safari Sling carry, works for shoulder carry too
I have lengths of small webbing attached to back-pack shoulder straps that hangs about belly length that i use to hang the rifle on
instead of looping around the neck
 
Studs sticking out to jam into your back doesn't sound very comfortable. There is a reason NOBODY puts studs on the side of a rifle. 🤷‍♂️
Calvary rifles were always set up this way with side sling mounts to facilitate cross body slinging. It works very well for that, but not as well for slinging over a shoulder, depending on how the rifle is set up and hangs.


Mark
 
  • Like
Reactions: DGY
Looking for reports from those that ues it before I make the holes. I put 8 to 12 k on and always looking for a more comfortable way to carry.
100% love side studs; Before you do it improvise a sling with some rope and masking tape to try it out; The way i walk and gear i carry (not much) makes side studs way more comfortable and practical across the back; Also brings a couple carrying positions into play that you can't do with traditional setups. it makes for an easy comfortable front carry. But with a heavy gear load the sideways profile of the rifle when over the shoulder may not be ideal.
 
The tikka that is supplied to the Canadian rangers have side mount flush cup. It make sense!! I might actually try it on one of my rifle… maybe the 338 federal that will be here in about 6 months.
 
I put QD cups on a 70s 1894 awhile ago -- it carries great cross-body muzzle-down, like it's not even there, and with a 3pt sling you can shoulder it really fast too.

Calvary rifles were always set up this way with side sling mounts to facilitate cross body slinging.

I haven't tried, but yeah I do believe you could ride a horse this way -- the barrel hangs just slightly angled out from the right hip.
 
Studs sticking out to jam into your back doesn't sound very comfortable. There is a reason NOBODY puts studs on the side of a rifle. 🤷‍♂️
We've have made hundreds of stocks with studs on the side. If the rifle is on the back the studs mostly don't touch, might touch the sling attachment. No difference to flush cups. No difference to bottom mounted sling attachments just that the rifle sits flat. On side mounted sling attachments scopes with large turrets or bubble levels sticking out dig in the back more. We fit almost 100% flush cups and about 95% on the side.
edi
 
Last edited:
  • Like
Reactions: DGY
verosling01.jpg


Personally, if I'm hiking to a shooting spot, I'll grab the backpack. Since I'll most likely be there for most of the day, I'll be bringing food/water/trinkets...
article-eberlestock-g2-gunslinger-ii-multi-role-tactical-backpack-review-2.jpg
 
  • Like
Reactions: DGY
My custom Mauser started as bottom swivel studs and then added side studs. If using a backpack/rucksack the bottom sling attachments are a bit better as the scope does not dig into the Rucksack otherwise side is more comfortable.
edi

N9HWwVZ.jpg
 
I like the Safari Sling, by Boonie Packer. Your firearm is right at your finger tips, your backpack doesn't interfere with the sling, you don't feel the weight of your firearm because it is across your shoulders and you can put the firearm on your back if need arises.
 
Back
Top Bottom