Is this Dovetail to Picatinney Adapter fit CZ 452?? thanks

[myriflemylife]

I found a Dovetail to Picatinney Adapter, seems fit cz 452 but not sure. the dealer dont know either. This one is for airgun, but it seems work in 22lr too. Any one knows it fit or not? thank you

Dovetail to Picatinney Adapter (17015)

Dovetail to Picatinny Adapter. Fits 9.5mm - 13.5mm Dovetails.

if it doesn't fit, how about this ring?

30mm High Profile Rings (RGPM-30H4)

30mm diameter, fits scope with objective up to 56mm. 4 Hex screws on top to tightly secure the scope. Fits 9.5-11.5mm dovetail

 

[cz452shooter]

Should work fine. Majority of the CZ's have an 11mm dovetail, with the exception of the American I believe which as a 3/8" dovetail. What model will you be putting it on?

 

[myriflemylife]

Should work fine. Majority of the CZ's have an 11mm dovetail, with the exception of the American I believe which as a 3/8" dovetail. What model will you be putting it on?

452 American..... I think it's 3/8" dovetail

do you think the Dovetail to Picatinney Adapter work? thanks dude.

 

[cz452shooter]

Ok, Well 3/8" = approx 9.5mm so technically it should fit but sometimes it doesn't always work out like you hope it will. Is this something you can buy and try to see if it it will fit and then take it back if it doesn't? Otherwise its somewhat of a toss up - unless someone else chimes in here who has used that product

 

[myriflemylife]

Yes, man, that's why I post. Anyway, I will buy one and try it. Thanks for your help~~~

 

[djwf69]

Adapter for cz

Where did you find that adapter?

 

[horseman2]

This is a previous post as to where I got mine.

Hi , yes we can produce rails for CZ
Thanks Josef

Josef Dlask, President,
Dlask Arms Corp.,
202B 1546 Derwent Way,
Delta, BC, Canada, V3M 6M4
Tel.: 604-527-9942
Fax: 604-527-9982
jdlask@telus.net
www.dlask.com

 

[myriflemylife]

Where did you find that adapter?

a airgun website

http://www.dlairgun.com/scopes.htm

This is a previous post as to where I got mine.

Thanks horseman, How much did you paid for the rails, do you need make holes on the receiver?

 

[horseman2]

I do not know the current cost.
There are set screws that press against the top of the action.

 

[myriflemylife]

I do not know the current cost.
There are set screws that press against the top of the action.

Thank you man, your information are very helpful

 

[Rick65Cat]

Jeeze...take the rail with you and try them out at the counter. No store will refuse that kind of request.