D.A. Drizzly OAL and stock replacemant question?

[IM_Lugger]

I’m interested in getting of the new Dominion Arms shotguns from CanAm; but was wondering;

1) What is the OAL of the stock 12.5” and the 15” mag fed models?

Which lead to the question;
2) Can I replace the stock with a folder or a pistol grip only stock?

3) Will 870 or Mossberg aftermarket stocks fit the gun?

Btw is it just me or the these two 12.5 inchers look like they have diff barel lenghths? I'm guessing the first pic is pompressed to look shorter....btw User PICS WECLOME

This may have been covered in the main thread, but I just don’t have time to go thru 150pages. So no 'do a search' replies.

 

[michaelsabre]

The second picture shows part of stock only. That's the reason its barrel looks longer.

 

[scott]

the 12" is too short for folder / pistal. the 15 might be close, differnt stocks will gain / lose 1" or so over others. so some might, some might not.

 

[cantom]

It goes on an OAL of 660mm...if the folder will fold and the overall length still meets that or longer then it's good to go.

 

[IM_Lugger]

anyone measured the OAL? anyone replced the stock?

 

[darkshadow]

with the folder on the 18" i made a ark for what a 15" would be and the OAL is to short.


maybe with a knoxx folder, there is a little end on it that sticks out futher.

 

[IM_Lugger]

Will 870 or Mossberg aftermarket stocks fit the gun?

 

[Dangles]

Will 870 or Mossberg aftermarket stocks fit the gun?

It's an 870 clone, same as an HP9. Any 870 stock (OEM or AM) should fit.

 

[IM_Lugger]

anyone know what the OAL of the 12.5" model would be with a pistol grip?

 

[cantom]

anyone know what the OAL of the 12.5" model would be with a pistol grip?

Even a 15" barrel gun would be very close to the limit on OAL. 12.5", pretty much forget it.
I don't have one to measure.

 

[faswagon]

I have both 15 and 12" both are under 26" with pistol grip.

Search for: Grizzly pistol

you will find a number of threads on this. the concensus seems to be (Canadaammo included) correct me if I'm wrong CanAm, that putting the pistol grip on does not fall under the "telescoping or by other means" in the regs. it is a factory stock, and a factory barrell, neither has been cut by the owner etc... therefor, should be ok despite being under 26" OAL... BUT be prepared to try to explain that to know it all squeeks that might see you with it, and LEO's if they get onterested in your "sawed off"

Edit: Just measured, grizz MAG 15" with pistol grip=24.5" 12"=three inches less

 

[faswagon]

PM if you want, I can put my grip on and snap a pic for you

 

[IM_Lugger]

Hey if you can it that'd be great! Thanks!

EDIT: so what's the OAL of the stock 12.5in model?

 

[Icefire]

12.5" with pistol grip = less than 660mm something near 22" if I recall.

The orignal with a fitted Decelerator pad (no damn prefit pad would work) is 32.25"

The gun look and feel nice, exept for the pump that lock if you hold the forearm toward you and fire, you need to relax the grip to move rack it.

 

[faswagon]

Hey if you can it that'd be great! Thanks!

EDIT: so what's the OAL of the stock 12.5in model?

The 12.5 is 22" (2.5" less than the 15 )

here's the 15" mag

I don't keep mine in pistol grip mode, especially when transporting, because I would rather avoid the hassle. see this thread: http://www.canadiangunnutz.com/forum/showthread.php?t=248339

 

[janesy]

I was just about to post a link to that thread

 

[michaelsabre]

Sooooooooo evil.......