Cooey Model 39 Surprise

DAR 701

CGN frequent flyer
Rating - 100%
172   0   0
Location
Saskatchewan
My father in law gave me his Cooey Model 39 to clean up for him. The rifle arrived at my house with sickly looking flaking varnish on the wood and a lovely lightly rusted barrel. After some 26 hours of elbow grease this is what I found under the crappy varnish:

IMG_0726.jpg


IMG_0729.jpg


The wood grain is very beautiful, not sure why it was hidden under the varnish. I used CLP and steel wool to clean the rust off the barrel, bringing out the original blueing. The stock had the varnish sanded off and 8 hand rubbed coats of Tru-Oil applied. The varnish was also removed from the white butt spacer and the black buttplate. Am very happy with the way it turned out! Looks much much better in person than in the pictures. It now looks worthy to be handed down to my brother in law.
 
Very nice. What did you use as varnish remover? Same stuff on wood and plastic (was okay on butt spacer). Have a 64 and 75 in need.

On the white spacer and the buttplate I carefully used a very sharp knife to remove the varnish, it came off the white spacer in one piece and flaked off the buttplate. I then hit the edges of the buttplate with some CLP and it looks like new now!
 
I won't give them back!!!!

Trigun

I shot it today with Mini-Mags at 25 yards to check function. Damn thing put all 10 rounds I fired into the 10 ring of a 20 yard .22lr target... gotta drop it off tonight otherwise I will keep it. The hunt is now on for a project Model 39...
 
Back
Top Bottom