So what Grizzly are you building?

Canuck223

Canuck223

CGN Ultra frequent flyer
Rating - 100%
80   0   0
Location
GTA
OK, so I'm sold on the idea of a mag fed short barrelled shotgun.

I'm holding out for the upcoming 12.5 inch choke tubed models with ghost rings.

I'll be adding the clone Surefire Chris is selling. Since I can't get a straight answer about the effects of muzzle blast on the mounted lights, I may have an option. I don't have permission to mention the vendor, but a stand off device indexed with no bottom holes should do the trick. The factory stock will be replaced with a Knoxx Compstock.

What's warming your christmas list???
 
For my Grizzly-MAG, I am going with a Mesa Tactical low tube adapter, with an ACE M4 SOCOM modular stock. I am probably going to give it a nice OD paint job, and replace the existing sights with some fancy LPA ghost rings. I've already got a 12.5 barrel for it.

It will be awesome, and by awesome I mean totally sweet.
 
mine will be
mag feed
12.5" barrle with breeching atachment.
S&J stoock adaptor with 20" m1913 rail
Troy BUIS front and back
Magpul m93 stock
Mag pul mad grip
S&J jumbo safety
BFG vickers sling
 
badboybeeson said:
mine will be
mag feed
12.5" barrle with breeching atachment.
S&J stoock adaptor with 20" m1913 rail
Troy BUIS front and back
Magpul m93 stock
Mag pul mad grip
S&J jumbo safety
BFG vickers sling
Click to expand...

whenever you finish making this, for the love of Sweet Zombie Jesus post pictures of it. I have something similar in mind..... just gotta get funds for it :(
 
I am keeping mine relatively simple.
15" mag fed.
Canam PG, and grip forend.
Side saddle shell holder, and a sling of somekind.

So far:

07250804191ae9.jpg


I am going to swap the forend to my Marine 870, and the grip forend to this one.
 
My 12.5" was supposed to be a K.I.S.S. cheap truck gun, but it has already acquired a Hogue stock, Mesa shell carrier and GG&G sling mount (BBB you have to get some West Coast dealers lined up). I suppose optics are inevitable seeing as the good folks at Canam saw fit to spec it drilled and tapped for a rail. Maybe the 12.5" mag fed will be the cheap truck gun... yeah, that's the ticket.
 
foggy said:
My 12.5" was supposed to be a K.I.S.S. cheap truck gun, but it has already acquired a Hogue stock, Mesa shell carrier and GG&G sling mount (BBB you have to get some West Coast dealers lined up). I suppose optics are inevitable seeing as the good folks at Canam saw fit to spec it drilled and tapped for a rail. Maybe the 12.5" mag fed will be the cheap truck gun... yeah, that's the ticket.
Click to expand...

we do have soem dealer out west.
demal services
GP tactical
and ds tactical has ordered before
 
Canuck223 said:
OK, so I'm sold on the idea of a mag fed short barrelled shotgun.

I'm holding out for the upcoming 12.5 inch choke tubed models with ghost rings.

I'll be adding the clone Surefire Chris is selling. Since I can't get a straight answer about the effects of muzzle blast on the mounted lights, I may have an option. I don't have permission to mention the vendor, but a stand off device indexed with no bottom holes should do the trick. The factory stock will be replaced with a Knoxx Compstock.

What's warming your christmas list???
Click to expand...

I wish someone would buy one of those fore ends and let us know how they work...;)
 
My 12.5" is on order, a Knoxx Spec Ops sits patiently in the corner and a wish list grows with every post I read :evil: . I'm hoping to keep it under control, so maybe just a shell carrier and rail with red dot.







Then a flashlight :rolleyes:
I'll need a laser for sure ;)
Then a bayonet mount :runaway:
A breaching attachment :onCrack:

This "cheap" shotgun is sure gonna cost me :redface: :slap:

(E) :cool:
 
I just got my 12.5" tube-fed Grizzly and put on a 12" LOP Hogue stock set. Thinking about a set of ghost rings or other sights. Want to keep it simple and effective...
 
grizzly fore ends

waynesixgun said:
I wish someone would buy one of those fore ends and let us know how they work...;)
Click to expand...

Tried out the fore end from canam today and there are a few problems. first prolem when you have it all tighten down to close the action it doesnt close all the way to lock out and its tight when you go to open the action . all in all , the one i tried didnt fit and would need some cutting . didnt even get around trying the light
 
You must log in or register to reply here.
Back
Top Bottom