Any place to buy ruger 10/22 tactical style?
- Thread starter John_smith
- Start date
Any reason in particular that you don't want to mod yourself? For the most part (99% of the time) It's a simple swap. If you can undo and retighten a screw, you're ready to go.
The Equipment Exchange on this board is a good place to buy builds, but due to the highly customisible nature of the 10/22, you're stuck with what the other person liked.
Send an email to Fabrice, owner of Fabsports.ca
fabn@fabsports.ca
I'm pretty sure he can build you a custom, very tacticool 10/22.
BTW, he told me his new FS-556 aftermarket stocks are arriving today. Pictures of the actual stocks should be up on his website on sunday.
fabn@fabsports.ca
I'm pretty sure he can build you a custom, very tacticool 10/22.
BTW, he told me his new FS-556 aftermarket stocks are arriving today. Pictures of the actual stocks should be up on his website on sunday.
Any reason in particular that you don't want to mod yourself? For the most part (99% of the time) It's a simple swap. If you can undo and retighten a screw, you're ready to go.
DIY is fun...
The only thing I'm not doing for my 10/22 build is the internal component swap: I'm meeting somebody at CRAFM later tonight to do just that... what can I say, I'm all thumbs.
I was able to swap out the hammer for my 597 though, so I guess that counts.
If I did that, surely you can make yourself a nice looking 10/22?
I was able to swap out the hammer for my 597 though, so I guess that counts.
If I did that, surely you can make yourself a nice looking 10/22?
The gun is rather easy to take apart and easy to put back together. Nothing to be afraid of cause after you do it once it just gets easier and easier to do.
Just remember the trigger sub assembly (trigger, sear and disconnector) can all be held together with a small piece of weed whacker line. I am certain if I didn't know that trick I would of never been able to get the thing back together.
Also don't forget modding it yourself makes it your gun, not someone elses you bought.
Just remember the trigger sub assembly (trigger, sear and disconnector) can all be held together with a small piece of weed whacker line. I am certain if I didn't know that trick I would of never been able to get the thing back together.
Also don't forget modding it yourself makes it your gun, not someone elses you bought.
JohnC
CGN Ultra frequent flyer
yep its easy as pie and you wind up with a gun that's uniquely yours ( kind of like a Harley based chopper). Any instructions you can't find stickied here you can get at ww w.rimfirecentral.com The weedwhacker trick is new to me but sounds like a great idea. I used to make slave trigger group pins out of copper electrical wire but this sounds like less work. Some of the kits you buy include a slave pin as well.
http://www.youtube.com/watch?v=H9NtYmk_qEo
That is where I found out about that weed whacker line, works like a charm except requires a tiny bit of wiggling to get the holes lined up.
That is where I found out about that weed whacker line, works like a charm except requires a tiny bit of wiggling to get the holes lined up.
Yea, I really want to see pictures of this new stock.
- Location
- Southern ON.
He must be updating the site because the stock is gone from the site. I can't find it anymore.
He must be updating the site because the stock is gone from the site. I can't find it anymore.
Yea, been 3 days now. Kind of wondering WTF is going on with the 556 stock.
Thats good to hear. Hopefully the supplies are good because they will probably be a huge seller.
there's one in the EE now sweet looking nordic kit with parts for 2 configurations, awesome price too... better grab it quick....
http://www.canadiangunnutz.com/forum/showthread.php?t=272771
not my ad, and I'm not promoting the seller at all, just a heads up on a good deal
http://www.canadiangunnutz.com/forum/showthread.php?t=272771
not my ad, and I'm not promoting the seller at all, just a heads up on a good deal
