P-mag

[mpjustin]

I just got my first P-mag for my AR and I now understand all the hype. these things are freaken awsome. I will have to try and find some more. can anyone point me in the right direction?

 

[proc]

Good luck - they are in short supply. They disappear in minutes on the EE.

 

[mpjustin]

thats how I got mine, I jumped on it as soon as it popped up. he only had one though.

 

[rivetc78]

The 5 rounds shoot better from a p-mag?

 

[scotty]

The 5 rounds shoot better from a p-mag?

QFT.

Until something changes or becomes available, bring on more 10 round LAR-15 mags.

 

[TDC]

10 rounds are fine...If the magazine works. There is a near zero chance of failure with the Pmags.

TDC

 

[Jay]

10 rounds are fine...If the magazine works. There is a near zero chance of failure with the Pmags.

TDC

R U saying the LAR-15 mags have problems?

Cheers
Jay

 

[Disaster Monkey]

R U saying the LAR-15 mags have problems?

Cheers
Jay

One of my four took some extensive adjustment to make it work. I still don't trust it completely.

 

[Jay]

One of my four took some extensive adjustment to make it work. I still don't trust it completely.

Dammit!!! With all the hype over the LAR mags, I bought 4 of them 4 my Type 97... (Coming in from CanAmmo, so I can't check 4 myself yet...)

Cheers
Jay

 

[FPembleton]

Dammit!!! With all the hype over the LAR mags, I bought 4 of them 4 my Type 97... (Coming in from CanAmmo, so I can't check 4 myself yet...)

Cheers
Jay

No one says you can only have one type of magazine. Get both!

 

[Questar]

One of my four took some extensive adjustment to make it work. I still don't trust it completely.

Did you ever notify us about the "problem"?

We have sold thousands of these magazines and there have been very few problems reported. I have personally fired thousands of rounds using these magazines and had very little magazine related issues.

If you've experienced issues that are truly magazine related then please contact us through email and let us know what the issue was.

Mark

 

[6gm6]

Dammit!!! With all the hype over the LAR mags, I bought 4 of them 4 my Type 97... (Coming in from CanAmmo, so I can't check 4 myself yet...)

Cheers
Jay

I've been running mine since Questar brought them in without a hitch.

 

[RobAK]

Jay, in case you wanted to go that route, PMags won't fit in a Type 97.

 

[Jay]

Jay, in case you wanted to go that route, PMags won't fit in a Type 97.

Thanks RobAK. I had not planned on using PMags in the Type 97.

Cheers
Jay

 

[9x25]

The only thing that i dont like with LAR mags, You have to slam it hard for reload with full 10, But with 9 rounds...no problem. When i have time, Im going to cut one coil from the spring to make reload easier with a full 10

 

[Savage]

Jay, in case you wanted to go that route, PMags won't fit in a Type 97.

I know I am having the mag well relieved when I get mine I dumped 30 USGI mags to go to the Pmags

 

[CanAm]

What is the cause of the pmag sticking in the t97? We may do our own "pmag" and I want to make sure it works.

 

[Disaster Monkey]

Did you ever notify us about the "problem"?

I bought mine at a local store, not directly from you guys. On this particular one, the weld at the front of the magazine is slightly misalined so that one side projected on an angle about 1.5mm above the other. This projection would catch on the case neck, causing failures to feed. It didn't do it on every round, but especially on the first two or three out of the mag. I took the mag apart and filed this area down level. After repeatedly disassembling, filing, reassembling and testing the mag, I think I have it resolved to my satisfaction. If I were hoping to use it for anything more serious than a range toy, though, I would be concerned. My other three LAR 10 round mags have worked fine.

I fully intend to buy more, and wouldn't advise anyone not to, or to panic if you already have. I'm very happy that these ten round mags are available.

Honestly, I never thought to contact Questar, since I didn't buy it directly from you. I'm confident though, from your reputation and my communication with you in past that you would have resolved the issue.

 

[acrashb]

Pmags curve sooner than a standard mag. The T97 magwell comes down further in the front than a standard AR magwell, so it interferes.

 

[carbonrod]

I know I am having the mag well relieved when I get mine I dumped 30 USGI mags to go to the Pmags

Dang man. Even your locker of custom Chinese rifles rocks.