Interchangable parts???

[GameStalker30-06]

I have a CBC (made in brazil) model 151 single shot 12 gauge..basically the same as the older remmys.. And I have a CIL model 420, of the same category..Will parts fit each other???both 12 guage, and both are pretty much the exactly the same, just very minor differences..I think they are the same, just different manu..'s..
Thanks

 

[easy]

There's no one better to answer than the one who owns both guns.

 

[1shotdown]

There's no one better to answer than the one who owns both guns.

These are wise words my friend

 

[farmer47]

i dont think they interchange . iwas selling these at a gun show and a dealer swapped barrels . locked the gun up tight . real good about it . bought them both on the spot . the way i see it.

 

[GameStalker30-06]

True enough......but I meant for a safety factor..the CIL barrel with is for 2 3/4 off a 2/34 frame, will fit on the CBC 3" frame that it's 3" chamber barrel came off of. but there is a little little bit of movement..and some other very small differences..like where the buttstock goes on over the receiver end.....just curious guys...

 

[farmer47]

alittle bit of movement sounds like an accident waiting to happen .the way i see it .

 

[Covey Ridge]

True enough......but I meant for a safety factor..the CIL barrel with is for 2 3/4 off a 2/34 frame, will fit on the CBC 3" frame that it's 3" chamber barrel came off of. but there is a little little bit of movement..and some other very small differences..like where the buttstock goes on over the receiver end.....just curious guys...

Are you asking if the barrels are interchangeable and if it can be done safely? If so that should only be determined by a qualified person such as a smith.