Need info on Mosin-Nagant (more pics post #20)

Run away, don't walk. Give it back.

I wasn't trying to be offensive with my above post. I was trying to give some honest advice to a request that reeked of inexperience. Please accept my apology.

I can see where Lou is coming from, but in all honesty if you're going to do a refurb on a milsurp, start with something that will fulfill your expectations when you've finished.

The bore is the first place to start.

With certain Mosins, and some collectibles you may have to ignore the shape of the bore. I did just that recently with a Finn refurb Mosin. The stock was a replacement and the exterior of the rifle was g-vg, the bore was good only. The only reason I bought it was the "New England Westinghouse" mark on the barrel. As you can see by the Mosin you're considering, the makers marks and serial numbers are on the barrel, rather than the receiver.

The rifle you have is not collectible at this point in time but on the other hand is steeped in history. It was, from the marks on the barrel built by Tula in 1934 and has a hex receiver which may or may not have been made far earlier. There is no crest on the top of the receiver or grind marks so the 1934 date is more than likely correct. It has been arsenal FTRed at some point where the parts were replaced with mismatched pieces. Doesn't take a genius to figure that much out. If the barrel didn't look like it wasn't properly cleaned and lubed after fireing corrosive primed ammunition it would be a rifle after LouthePous' heart.

As is, it's a donor for parts IMHO.
 
Last edited:
IMHO as a shooter it is still salvageable.

Barrels can be replaced if need be.

If I was in the market for one I'd pay no more then $75 for it tops.
 
ive had mosins /303s with crap bores before they sometimes were quite surprising.the one your looking at has very strong rifling.after shooting it a bit you might be surprised at how much better it looks
 
ive had mosins /303s with crap bores before they sometimes were quite surprising

I have to agree. I have a Westinghouse M91 Mosin that had not been cleaned for about 10 years after corrosive ammo. I cleaned and cleaned, shot it, and cleaned some more. Still lots of frosting, but the lands are still strong, and it shoots like a house on fire.

However, the availability of other, nicer mosins will dictate the price of the example you're looking at. IMHO, it's worth $100 tops, although well worth it at that price, especially if it come with some ammo. I don't think you will be sorry if you buy it, but pay a reasonable price.
 
Run away, don't walk. Give it back.

I wasn't trying to be offensive with my above post. I was trying to give some honest advice to a request that reeked of inexperience. Please accept my apology.

You don't have to apologise for anything. I did not find what you said offensive in any way at all.

Thanks for all the advice. I still have to talk to the guy about the price. I will have to find out how many round will come with it but if its only a handful then I will give it back. I wont be paying 200 bucks that's for sure.
 
Back
Top Bottom