Stoner SR-15 - value and rarity??
- Thread starter bladerogers
- Start date
Crap. After checking the vids again, I really want that Diablo!!
I might have to just go with the PWS piston conversion on my N8CQB 10.3" upper...
I might have to just go with the PWS piston conversion on my N8CQB 10.3" upper...
Damn.
Caught in my web of lies again!!!
lol
No, I didn't get either. I do have an SR15. And I WANT the Diablo. But just don't have the cash right now. Tax time sucks, and going from a 300k townhouse to a 500k+ house takes away a little 'fun' money.
Caught in my web of lies again!!!
lol
No, I didn't get either. I do have an SR15. And I WANT the Diablo. But just don't have the cash right now. Tax time sucks, and going from a 300k townhouse to a 500k+ house takes away a little 'fun' money.
I was considering the Diablo but its not really what I want cause I want a 14.5" or 16" upper. But right now I have a lower with no upper and My lower desparately needs an Upper.
I've got 2 Colt 6920 uppers with no homes(lowers) right now(1 with about 700rds through it, the other with 2k). I'm contemplating putting one(the 2k rd one) up on the EE because it's not what I want or need at the moment.
Let me know if you're interested. That would put me closer to the Diablo...
Yes... the SR-15 sold to a person who is on Gunnutz... it is up to them if they wish to say who they are
The Diablo did not sell so it's up for bids again.
Mark
Must be new because I just noticed PWS has a DC-16 available now on their website.
Anything in the works to bring those uppers in Mark?
No... GunAuction .ca belongs to a fellow that I know and have worked with before. He asked Questar to assist with testing before he went live and we agreed... we also did a banner swap and listed a few auctions.
I always wanted to start a Canadian version of GunBroker .com but never had the time. I think it's very needed here in Canada and hope it does well... put a number of items up for sale on the site and if I can ever find time I have a bunch more items to put up for auction.
There just aren't enough hours in the day.
Mark
FYI - you see SR15E3's going on auction and some dealers here in the US for $3k.
Our MSRP for the gun in the US is $2207.00
When you want to discuss the parts in it.
KAC SR15E3USD $2,207.00
1:7 Cold Hammer Forged Barrel(Chrome Lined)
M4 Feed ramps
KAC E3 Bolt and Barrel Extension (30k+ round life)
KAC midlength Gas System
URX Medium (5.56 Cal.) with Integral Folding Front Sight P/N 20549
KAC 600m BIS P/N 98474
KAC Two Stage 4.5lb Trigger P/N 25362
Fully Ambidexterous controls
7 Integrated sling swivel attachment points and 2 push button swivels
KAC/LMT CRANE-SOPMOD Milspec buffer tube 6 postion stock
Forward Pistol Grip P/N 97098
Enhanced Trigger Guard
3, 11rib rail panels
Our MSRP for the gun in the US is $2207.00
When you want to discuss the parts in it.
KAC SR15E3USD $2,207.00
1:7 Cold Hammer Forged Barrel(Chrome Lined)
M4 Feed ramps
KAC E3 Bolt and Barrel Extension (30k+ round life)
KAC midlength Gas System
URX Medium (5.56 Cal.) with Integral Folding Front Sight P/N 20549
KAC 600m BIS P/N 98474
KAC Two Stage 4.5lb Trigger P/N 25362
Fully Ambidexterous controls
7 Integrated sling swivel attachment points and 2 push button swivels
KAC/LMT CRANE-SOPMOD Milspec buffer tube 6 postion stock
Forward Pistol Grip P/N 97098
Enhanced Trigger Guard
3, 11rib rail panels
Part and cost breakdown
KAC Two Stage 4.5lb Trigger P/N 25362 $329.85
Semi-Auto Ambo Selector P/N 20385 $116.26
Medium length URX RAS P/N 20549 $526.31
KAC Rear Receiver Slingplate P/N 22051 $82.30
KAC 600m BIS P/N 98474 $193.98
Push-Button (Push-B) Swivel P/N 97079 $17.83
Forward Pistol Grip P/N 97098 $67.13
LMT SOPMOD Buttstock Assembly $263.85
E3 Bolt and 1:7 Barrel Assembly $785.00
E3 Buffer $52.00
KAC Two Stage 4.5lb Trigger P/N 25362 $329.85
Semi-Auto Ambo Selector P/N 20385 $116.26
Medium length URX RAS P/N 20549 $526.31
KAC Rear Receiver Slingplate P/N 22051 $82.30
KAC 600m BIS P/N 98474 $193.98
Push-Button (Push-B) Swivel P/N 97079 $17.83
Forward Pistol Grip P/N 97098 $67.13
LMT SOPMOD Buttstock Assembly $263.85
E3 Bolt and 1:7 Barrel Assembly $785.00
E3 Buffer $52.00
Last edited:
Here's mine with Magpul UBR, MIAD, Aimpoint M4s(until I get a mount for my 1-4 Nightforce ). Disregard the custom Damascus bowie.
While I paid a little more than $2200USD, it's definitely worth it for me, for the full ambi controls alone.
I'd love another SR15, just for the lower....
[/URL]
). Disregard the custom Damascus bowie. While I paid a little more than $2200USD, it's definitely worth it for me, for the full ambi controls alone.
I'd love another SR15, just for the lower....
KevB and guys who got the SR15,
How many URX screws did you guys get? I got two screwed into the front, but some people said that URXs should come with four. I found that the screws were walking out too after sustained shooting.
How many URX screws did you guys get? I got two screwed into the front, but some people said that URXs should come with four. I found that the screws were walking out too after sustained shooting.
