huntingfish
CGN frequent flyer
- Location
- Quebec City
Hi All,
Long story short, I took apart my crosman pumpmaster 760 and seem to have some problems putting it back together. I found the document on crosman.com with the expanded view of all the parts of the pumpmaster 760. However that doesn't show how to properly assemble them (and oh my god is the quality of that document poor!) So, please excuse me if part numbers are slightly wrong, they are hard to read).
I found a video on youtube that showed how to get the trigger assembly together, but I still have some questions about piece #766-030 (white plastic part in which spring is inserted into) and piece #760C080 (the spring). The spring rests on piece #760E078 (last piece of the pump I would think) and then the white plastic part goes onto the spring. But where does the white plastic part (766-030) goes? Does it stay in the barrel, resting on the plastic divider that's part of the receiver? The white plastic part seems to have a hole through it, however I can't quite see what's the use of it: It looks like there should be a screw that goes through it.
Also, what's the purpose of piece #760B057 (L shape piece that goes under the trigger piece)? Does it actually fit into the plastic equivalent of the "bolt" (#760H098)? From what I could see, the only use of the L shape piece is to stop the operator from engaging the trigger while the bolt is cocked.
Finally, when I #### the bolt, there used to be a "click" sound. However, right now it seems like there is no sound whatsoever. I also find it odd that no piece interacts with the bolt. I'm sure this is incorrect.
Please help
Fish
Long story short, I took apart my crosman pumpmaster 760 and seem to have some problems putting it back together. I found the document on crosman.com with the expanded view of all the parts of the pumpmaster 760. However that doesn't show how to properly assemble them (and oh my god is the quality of that document poor!) So, please excuse me if part numbers are slightly wrong, they are hard to read).
I found a video on youtube that showed how to get the trigger assembly together, but I still have some questions about piece #766-030 (white plastic part in which spring is inserted into) and piece #760C080 (the spring). The spring rests on piece #760E078 (last piece of the pump I would think) and then the white plastic part goes onto the spring. But where does the white plastic part (766-030) goes? Does it stay in the barrel, resting on the plastic divider that's part of the receiver? The white plastic part seems to have a hole through it, however I can't quite see what's the use of it: It looks like there should be a screw that goes through it.
Also, what's the purpose of piece #760B057 (L shape piece that goes under the trigger piece)? Does it actually fit into the plastic equivalent of the "bolt" (#760H098)? From what I could see, the only use of the L shape piece is to stop the operator from engaging the trigger while the bolt is cocked.
Finally, when I #### the bolt, there used to be a "click" sound. However, right now it seems like there is no sound whatsoever. I also find it odd that no piece interacts with the bolt. I'm sure this is incorrect.
Please help
Fish
