What's on YOUR reloading shelf?

[firemachine69]

Just getting my feet wet with reloading here, and checking in with what I've got. I know, not much compared to some of you guys.


- Breechlock Challenger single-stage press with .308 dies (only caliber I load currently)
- Various 'minors', like a bullet puller, vibratory tumbler, etc.
- 1 pound of Varget
- 1 pound of IMR 4895
- 100 count Hornady Interlock SPBT 150gr.
- 100 count Sierra GameKing Spitzer BT 165gr.
- 100 count Nosler Custom Competition BTHP 168gr. (for my anti-zombie loads )
- 150 count of new .308 Winchester brass (fifty of which have been overzealously tumbled )


Let's see your shelves guys, and any recommendations for my own .308 loadings are appreciated.

 

[Cummins4x4]

You want me to actually count all my stuf
Lets just say I have more equipment and components than a lot of small shops. Forester coax, 15 or so sets of dies, tumbler, Lyman DPSII, Tiptron gun vise, just off the top of my head

 

[colt45cz75]

Ponsness Warren 900, 2 Dillon 550's, Lee classic cast, RCBS Chargemaster combo,trimmer,case master, lyman tumbler, hornady tumbler, 14 different powders,about 25000 assorted primers, 20,000 12 gauge wads, and some other #### I can't recall offhand.

 

[Wookie316]

I don't have that much time, nor do I want to type that much

 

[Budweiser2]

x2 with all my reloading gear . Too numerous to list.

 

[Rigmover]

Enough to make it through WWIII.

 

[SuperCub]

I have about 30lb asst powder, 10K primers, about 3K boolits, an Ammomaster press, Hornady beam scale , about 20 sets dies, two Lee hand primers, tumber and a few things I don't know what they are.



.

 

[Cummins4x4]

Actually the right question is whats in your reloading ROOM

 

[Fassteel]

You want me to actually count all my stuf
Lets just say I have more equipment and components than a lot of small shops. Forester coax, 15 or so sets of dies, tumbler, Lyman DPSII, Tiptron gun vise, just off the top of my head

I have the same stuff as this fellow except that I have an extra Co-Ax press ands a few more die sets, K Hornet, 19Calhoon, 257 AI,222, 260, 257 bob,250 Sav.

FS

 

[billdick]

Over 40 die sets, approximately 80 pounds of powder,hundreds of pounds of shot, probably 15 000 bullets, maybe 10 000 brass, thousands of wads and hulls,5 press's,maybe 12 000 primers, I have not enough yet.

 

[SandRoad]

I measure it by weight. Somewhere between one and two tonnes.

 

[blacksmithden]

My "reloading bench" is in a series of boxes waiting to get shipped to Edmonton. Once I'm there, I have a 10x20 foot space downstairs that is going to get turned into my man cave. Too much stuff to list even if I could remember it all.

 

[Holleyman]

More stuff than I am comfortable to post on a public website.

 

[warrenb]

All I can say is, it's a god job I did'nt start reloading to save money.

 

[John Y Cannuck]

All I can say is, it's a god job I did'nt start reloading to save money.

Well put!

 

[firemachine69]

I load for the variety and accuracy benefits.

I also forgot, I have some Winchester large rifle primers to go along with it, as well...


It seems everytime I drop in the gun shop, I leave with tons of roll-your-own gear. I made a smart comment about not saving any money since I picked up that Lee press the first day, one of the regulars laughed and said "welcome aboard the mighty ship of being screwed and thin wallets!"

 

[rattle]

I have dies and componets for firearms I have yet to acquire. Pretty much figure that prices are just going to go up.

 

[chise]

I've got a toolbox full of primers, 3 presses, 6 buckets of pistol brass, etc.

 

[chemo]

what's on my reloading bench?
too much f**king brass shavings, corn cob media and dead primers

it's a shame my gf doesn't have access to my workshop, cleaning doesn't get done.

 

[polaris]