.45 acp rifle in canada

[TheManInBlack]

I know the storm and the camp carbine are available in .45 acp, are there any other legal ones?

 

[Merch]

They're not cheap but you can get a UMP in .45

 

[Nordland]

^in an ugly grey to boot

 

[Merch]

And limited to 5 rounds. You could wait for the HERA 1911 kits to make their way to Canada and use higher caps mags.

 

[alexD92]

^in an ugly grey to boot

I think they come in black now.

 

[Ardent]

What's up with the demented avatars showing up all over the site? Insane clowns, joker wannabes, etc. If that's the sh1t some folks want to emulate, I hope they stay out of the sport.

As for the question, there are some conversion kits floating around for Lee Enfields, and as well most .473"/Standard bolt face rifles can be converted to a .45ACP carbine through a barrel switch by a smith with a reamer. You'd need to work out your own magazine system however, if you wanted a repeater. Some of the Enfield kits came with 1911 magazine adapters. I believe the kits are out of production so your best bet's to find a used one stateside and import it.

 

[Uberfiend]

.45 carbine

Here's a couple of mine, USC/ UMP conversion ( I also have a 16" barrel for it.) and a Glock 21 project. One expensive and one cheaper. Both fun.http://s676.photobucket.com/albums/vv130/Uberfiend_photos/
the bare bones USC is an option too, in grey or black.

 

[frward]

the glock rifle

 

[fishy]

What's up with the demented avatars showing up all over the site? Insane clowns, joker wannabes, etc. If that's the sh1t some folks want to emulate, I hope they stay out of the sport.

... That's an obama socialist poster.

 

[cancer]

What's up with the demented avatars showing up all over the site? Insane clowns, joker wannabes, etc. If that's the sh1t some folks want to emulate, I hope they stay out of the sport.

Originated as an Obama joke on the Internet, came into noteriety a couple months back when it swept across the US Cable news networks in a frenzy suggesting everything under the sun (racism, socialism, blah, blah, blah). This is the original image:

The Beretta Storm was available for a limited time in .45ACP. Maybe be able to find a used one.

 

[Hadrian]

What's up with the demented avatars showing up all over the site? Insane clowns, joker wannabes, etc. If that's the sh1t some folks want to emulate, I hope they stay out of the sport.

Yes, a person's avatar speaks volumes of their personality...

 

[Roughneck12]

hahahaha

 

[mimirspring]

rifle kits

What's up with the demented avatars showing up all over the site? Insane clowns, joker wannabes, etc. If that's the sh1t some folks want to emulate, I hope they stay out of the sport.

As for the question, there are some conversion kits floating around for Lee Enfields, and as well most .473"/Standard bolt face rifles can be converted to a .45ACP carbine through a barrel switch by a smith with a reamer. You'd need to work out your own magazine system however, if you wanted a repeater. Some of the Enfield kits came with 1911 magazine adapters. I believe the kits are out of production so your best bet's to find a used one stateside and import it.

Hello everyone,
I found this place a while back... they do an Enfield in .45 and even 7.62x39 !!! They don't deal international, but I sure wish they did.
http://www.specialinterestarms.com/index.php?page=enfield_conversions

 

[blueblast]

Correct me if I'm wrong, but is this not Gunnutz.com, and not the hippie-douchebag nouveau art forum?
Lets talk guns, not art!
Do you need the .45 to be a black-gun repeater? Why not just get a good ol' lever gun in .45 colt?

 

[Ardent]

Do you need the .45 to be a black-gun repeater? Why not just get a good ol' lever gun in .45 colt?

No doubt... and you get a much larger magazine capacity with come options, plus it's not jimmy rigged like an Enfield converison. Lets you shoot heavier bullets as well.

... That's an obama socialist poster.

Roger that, thanks to both for the clarification.

 

[Uberfiend]

I like my little G21 carbine posted earlier bcuz mags are plentiful and 10-rounders, I usually bring a dozen or so.

 

[Demon971]

Correct me if I'm wrong, but is this not Gunnutz.com, and not the hippie-douchebag nouveau art forum?
Lets talk guns, not art!

Yeah, who gives a sh!t what someone has for their avatar. It's their own choice.

I'm not sure, but doesn't the Berretta Cx4 come in .45?

 

[dudley2112]

Yeah, who gives a sh!t what someone has for their avatar. It's their own choice.

I'm not sure, but doesn't the Berretta Cx4 come in .45?

i was told we couldnt get those here anymore but i could be wrong

 

[cancer]

i was told we couldnt get those here anymore but i could be wrong

IIRC, the factory stopped offering them. That said, some models still made it into Canada.

 

[22lr]

mechtech carbine conversion units were available for some time as well, although carbine ends up being restricted just as original pistol. I still have one. Horrible quality but hey, it goes bang every time.