Dillon XL650 help... which sized casefeed plate for .45ACP?

[CanuckShooter]

Could any of you Dillon owners who reload .45ACP tell me what casefeed disk you use in the casefeed assembly?

My dad's machine has the large pistol plate in it, and it keeps jamming with the .45ACP brass... the brass gets stuck between the teeth of the disc, and that white plastic piece inside the casefeed assembly. We tried using the spacer washer but that didn't work. Would the small pistol plate work? I know there is some caliber overlap between the large and small pistol plates. Should I try using TWO spacer washers?

Any advice would be greatly appreciated.

 

[bear.23]

Could any of you Dillon owners who reload .45ACP tell me what casefeed disk you use in the casefeed assembly?

My dad's machine has the large pistol plate in it, and it keeps jamming with the .45ACP brass... the brass gets stuck between the teeth of the disc, and that white plastic piece inside the casefeed assembly. We tried using the spacer washer but that didn't work. Would the small pistol plate work? I know there is some caliber overlap between the large and small pistol plates. Should I try using TWO spacer washers?

Any advice would be greatly appreciated.

Should be the LP, no washers.. but without the 9mm adaptor...

Should be nothing in the "funnel" area of the feeder...

 

[Quigley]

Are you overloading it with cases?

 

[Walter Hornby]

no white insert in the funnel thats for 9 mm and maybe 38 supers (i don't use it myself.) also only load about a one pound coffee can in at a time. use the large pistol plate.

 

[glycerin]

X3, i use LP for .38 spcl, .45 acp, and 9mm. white plastic piece=guide block. I only had minor problems with 9mm. Try loosening guide block screw, see if there's any adjustment room. Check for burrs on plastic moulding. Dillon is very good about replacing problem parts.