Swiss Arms/ Aimpoint CompM4s

[IntelGDR691]

Just a few pics of the charging handle clearance with the CompM4s

Note: The factory spacer is installed. No sight co-witness possible with this spacer.

 

[dizzy]

looks like if you take out the spacer and charge palms up you will still have no trouble. why cowitness? i still don't get that when you are using two totally independant sighting systems??? if your aimpoint fails. ditch it and use the buis, to heck with cowitness

 

[UncleWalther]

sweet rig.... looks like you nabbed one of the 1 in 7s.

 

[IntelGDR691]

sweet rig.... looks like you nabbed one of the 1 in 7s.

Thanks!

Yep, one of the last....

 

[USP]

sweet rig.... looks like you nabbed one of the 1 in 7s.

you sell mine twice!!!!!!

 

[cjs]

sweet rig.... looks like you nabbed one of the 1 in 7s.

How can you tell from the pictures? I would love to learn how

 

[IntelGDR691]

looks like if you take out the spacer and charge palms up you will still have no trouble. why cowitness? i still don't get that when you are using two totally independant sighting systems??? if your aimpoint fails. ditch it and use the buis, to heck with cowitness

Yeah, I think I'll try removing the spacer. I think that the front sight may obscure the FOV without the spacer...I'll see.

I agree with you, I don't care about the co-witness theory.

 

[UncleWalther]

you sell mine twice!!!!!!

Nope... yours is the 14.3 shorty. One of the twenty or so in the country.

 

[OZZ]

Nope... yours is the 14.3 shorty. One of the twenty or so in the country.

So these ended up being rare?er I passed on it and went for the carbine instead when TSE had them.

 

[greentips]

Don't bother removing the spacer - the dot will be sitting somewhere on the edge of the front site hood.

 

[IntelGDR691]

Don't bother removing the spacer - the dot will be sitting somewhere on the edge of the front site hood.

I may look for a Larue mount. I wonder what height should I pick? Tall, med or short to have about the same height I already have with the factory spacer.

 

[incorrigible]

It may be hindsight but might you have been better off with a Comp4 as opposed to the Comp4s?

 

[IntelGDR691]

It may be hindsight but might you have been better off with a Comp4 as opposed to the Comp4s?

Well, I prefer having the battery tube in the lower position and since the cycling of the bolt is not affected by it, I chose this one.

A matter of personnal preference I guess.

 

[dizzy]

I would remove the spacer as you will be shooting with both eyes open and the front sight will blurr out anyhow, trust me it won't affect your accuracy as the dot will still superimpose on the intended target

 

[dizzy]

the larue mount is not superior to the aimpoint mount, if you absolutely must change things, get a different charging handle, I forget who makes them but they are bent down a little, still think if you charge palms up you won't have interference if you remove the spacer

 

[OZZ]

I like the the T1 best on the Swiss carbine or CQB and no charging handle issues with it or the Larue mount.

 

[USP]

OZZ how do find the Micro with the high mount? I have both the high and low Larue mounts. Is the low to low and gets blocked? Thought the high might be to far up. Have you tried the in between medium mount for the Micro?

 

[dizzy]

Nice Ozz

 

[Paulinski]

Nope... yours is the 14.3 shorty. One of the twenty or so in the country.

There is only 20 14.3" carbines in the country?

 

[Paulinski]

I like the the T1 best on the Swiss carbine or CQB and no charging handle issues with it or the Larue mount.

Nice rig. I was thinking about the shortest LaRue Aimpoint T1 mount.