What gun cleaner and lubricant do you use?

N

Ngyukon

CGN Regular
Rating - 100%
154   0   0
Location
Cowtown
What products do you use to clean and lubricate your guns? Hoppes, Break-Free CLP, Mil-Comm, etc

I use Mil-Comm's cleaner/degreaser and grease for rails and oil for other parts.
 
WipeOut the barrel, while I rub down everything with CLP. Swab barrel a few times then one swab with CLP, re-assemble & done.
 
I use shooters choice bore cleaner with a tooth brush (for everything).

JB Bore cleaner once in a while to get everything out of the rifling (just for the bore).

I will use Brake cleaner to get the initial manufactures shipping/storage sludge off.

I use Gun scrubber from time to time as well, but usually for the semi-auto actions that are a hassel to completly take down. I will still periodically completely take down the firearms and use the tooth brush.

Upon reassembly I use White Lithium Grease almost exclusively. I really like the fact that it stays where you put it. I have never had a problem with it "burning" off.

I also really like the Rem-oil wipes for finishing off the assembled firearm, wipe it all down before I put it away in the safe.

Cheers!
 
Clean with Hoppe's 9.

Lube with Birchwood Casey 100% Synthetic Gun Oil with Teflon (aerosol). This stuff is really amazing and I use it on my high end guns. It really resists 'burn off', leaves an unbeatable protective and lubricating residue and ensures that guns will shoot no matter how cold it gets.

For rest of my guns I use Remington Gun Oil with Teflon.

I always make sure that the oil has teflon in it. Teflon came recommended to me years ago by different professional gunsmiths. It is true that if you use it a few times the teflon builds up on the parts - it's really great.
 
You must log in or register to reply here.
Back
Top Bottom