Source for Aftermarket Recoil Pads for Benelli?

[Shalpin]

As it says, Im looking for sites, stores, etc. for aftermarket pads for Benelli Shotguns... Anyone with opinions/Suggestions?? Much appreciated!!

 

[Beretta687EELL]

Most gun shops will carry recoil pads. I prefer Kick-eez ... here is a link ...

http://www.kickeezproducts.com/

They usually have to be ground to fit. There are instructions on the web site.

 

[Shalpin]

i'm looking in particular for a recoil pad that has a 1-1.5inch drop on the butt ... Guess i should be a little more specific? hehe..

 

[Beretta687EELL]

Oh, you want to install an adjustable recoil pad ... I've had three installed on three different guns, all in the US. All were excellent jobs, prices ranged from $165 to $200 US. They probably will be a little higher priced now. They will all probably sell you the hardware and pad and you can install it yourself, but they will all require grinding to fit. Two have web sites ...

Country Gentleman http://www.gunfitter.com/
Mark Deprez http://www.gunfitter.com/

If you want to contact them, use the telephone, since they travel to shoots.

 

[jonesbb630]

I would call any Benelli dealer listed on top of this page. If they don't carry or won't order an aftermarket that fits your Benelli, check with The Gun Dealer in McAdam, New Brunswick. Ask for Ross Faulkner, the owner. He may be able to help you. I also believe he's the biggest Benelli dealer in Canada.

I would go with this one.

http://www.limbsaver.com/2010/products/firearms/recoil_pads/index.php#precision

Good Luck.

 

[Shalpin]

Oh, you want to install an adjustable recoil pad ... I've had three installed on three different guns, all in the US. All were excellent jobs, prices ranged from $165 to $200 US. They probably will be a little higher priced now. They will all probably sell you the hardware and pad and you can install it yourself, but they will all require grinding to fit. Two have web sites ...

Country Gentleman http://www.gunfitter.com/
Mark Deprez http://www.gunfitter.com/

If you want to contact them, use the telephone, since they travel to shoots.

THAT IS EXACTLY WHAT IM LOOKING FOR!!! PERFECT!!!

Now ... Does anyone stock anything like this here in Canada??

 

[Beretta687EELL]

Are you planning to install it yourself?

 

[Shalpin]

Are you planning to install it yourself?

I would like to ... Although if the price is right and its a dealer/gunsmith i can trust i would certainly let the expert do their thing..

 

[Beretta687EELL]

Here is what the metal looks like ...

You need to grind it and the recoil pad to fit the stock. You can also polish it so the metal is shiny. So they look like this ...

My experience has been that the labour component is about $50.00 to $65.00 US. Most of the guys that I dealt with in the States were knowledgeable gun fitters and would spend some time making sure you had the stock set up properly for you.