What SKS parts needed

[burnt_servo]

Hello fellow CGN users. The one who bought SKS . I just wanted to know what parts to you need for those. Let me know please so I can look into bringing parts for you.

i have a norinco sks that everything attached to the trigger guard is pretty much wore out ( meaning the inside guts that work the hammer ) .

can you get a complete drop in trigger guard assembly ?
price and availability ?

and if it's a russian made assembly ,
would it fit, or come close to fitting a chinese sks ?
and is it made from any better steel than a chinese model ?

 

[Max-4]

5 Rd fixed mags like this

X-2 I will need a few of these!!!

 

[fat tony]

Hello Sergey, how about trigger groups and those little springs that stick out of the rear of the stock, when you remove the trigger group?

 

[Claven2]

1) non-franken-pinned mags without serial numbers in them (pinned on the follower like civilized people do).
2) Gas cylinders. Most likely part to corrode if you forget to clean it.
3) Trigger internals such as sears - people are bound to botch trigger jobs

Can't think of much else. Not much ever breaks on an SKS.

 

[fat tony]

fibreglass SKS stocks, if such a thing exists in Russia.

 

[lorne19]

How about some more surplus ammo, especially 7.62x54r. I'd take a case if it was reasonbly priced.

 

[Claven2]

The fibreglass SKS issue stocks are Chinese.

 

[fat tony]

I gathered that - just thought there might be a Russian version, I got one, pretty nice quality item btw.

 

[SoLDneR]

Got this pic from another forum,and according to the ppl who post it,his friend is from russia and he see this stock often in russia.

 

[lejarretnoir]

3) Trigger internals such as sears

X2 on sears and disconnectors.

 

[fat tony]

Gas cylinders, oh heck, everything but the receivers. . . hmmmmm. . .

 

[pizdets17]

need a new top handguard, boiling water turned my laminated one green

 

[fat tony]

I just flood hot water from the tap into my gas cylinder - it works fine.

 

[pizdets17]

Yea, I didnt know boiling water would "cook" my wood lol

I just flood hot water from the tap into my gas cylinder - it works fine.

 

[Satain]

Yea, I didnt know boiling water would "cook" my wood lol

Get some furniture stripper then once back down to bare wood use bleach on effected areas. Then re-apply some laquer to both sides as the probally didn't. Then go have fun.

 

[pizdets17]

Or find another one for $10-15 lol. Thanks again for the deflector!

Get some furniture stripper then once back down to bare wood use bleach on effected areas. Then re-apply some laquer to both sides as the probally didn't. Then go have fun.

 

[pizdets17]

What if i just sand it down and put furniture stain on it?

 

[Satain]

You will still need to apply a coat or 2 of laquer to seal the wood after staining or risk the chance of wood seperation or burning.

 

[lone-wolf]

gold bayo