Makarov by Umarex

Joe549

CGN Ultra frequent flyer
Rating - 100%
150   0   0
This is my review on my latest air pistol, the Makarov by Umarex.

Description: (From Umarex’s website)
The Makarov Air Gun fires steel BBs at a speed of 380 feet per second from its full-metal constructed frame. This double-/single-action pistol has a moveable slide and a drop-free 16-shot BB magazine. The Makarov PM is powered by a single 12 gram CO2 capsule that is concealed in the grip frame. A great practice pistol for Makarov owners and a great price for heavy metal constructed BB Gun.

Full metal construction
Slide manually moves for added realism
Double & Single action
Drop free 16-round magazine
CO2 Powered

The Russian designed Makarov, first developed in 1948, is based on the Walther PPK. This air pistol is all metal construction with plastic grips. The slide is moveable manually, however is not a blowback and will not operate when fired. The gun can be fired in both SA and DA but must be manually cocked each shot for SA. The weight and feel is similar to the real version. The CO2 and separate removable BB magazine are housed in the grip, the CO2 is accessed by sliding the grip rearward and the BB magazine is released out the bottom of the grip. For the most part the construction is solid, there is a bit of rattle in the slide but the barrel is separate and not effected.

Performance:
The gun shoots well and is consistent but shots seem to pull to the right everytime. The trigger pull is somewhat smooth is double action with about a ¾ inch pull but seems to stiffen up in SA. The thumb release safety located on the left side of the slide just forward of the hammer is stiff right out of the box but loosens up with use. When set in “safe” position, the trigger will not pull, the hammer cannot be cocked and the slide will not operate. Once the safety is set to “fire”, the hammer can be cocked either manually or by racking the slide. The safety lever also functions to lock the slide in the open position, by placing the safety in “fire”, racking the slide all the way back and then placing the safety on “safe” the slide will remain locked in the open position. Aiming down the sights can be difficult, even in moderate light, because of the very narrow front blade sight. I would recommend painting the front blade white for better visibility. Loading of the BBs into the magazine is greatly enhanced by the use of a speed loader. I use the one that came with one of my Marksman pistols, it is a simple piece of molded rubber tube with a squeeze point to release the BBs from the storage portion of the tube into the funnel shaped nozzle.

Overall I find this gun is fairly well built but definitely needs some changes to bring it up to the same quality of some of Umarex’s other models such as the HK P30. The all steel construction is a big plus, but the rattle in the slide, uneven trigger pull and the BBs pulling to the right are the things that bring the overall end quality of this gun down. The power is good at a rated 380 fps and shots per cylinder is high at around 80-100. If you are looking for an inexpensive low end gun that you can shoot all day for fairly cheap, the Makarov would be one of the better choices.

IMGP1082.jpg


IMGP1084.jpg


IMGP1086.jpg
 
Is this "metal" or steel?

I have one that is all steel, and something like 90%+ of the parts are interchangeable/identical with a "real" Makarov. That is because it is made in the same factory as the Makarovs.

It uses a double stack width mag that holds both the BBs and the CO2 cartridge. The grips are real Makarov grips since the CO2 is actually a standard Makarov mag size, and held in by the standard heel release.
 
I guess it would be steel. I doubt that any of the parts are interchangeable with a genuine Markarov, you can see in the picture for yourself and judge....The CO2 housing is fixed and does not drop out of the handle and the BB mag is seen in pic 2. It's just a small single stack strip style....
 
Is this "metal" or steel?

I have one that is all steel, and something like 90%+ of the parts are interchangeable/identical with a "real" Makarov. That is because it is made in the same factory as the Makarovs.

It uses a double stack width mag that holds both the BBs and the CO2 cartridge. The grips are real Makarov grips since the CO2 is actually a standard Makarov mag size, and held in by the standard heel release.

I'd love to see pics of that!

Sounds like a really well made and fun design.
 
Is this "metal" or steel?

I have one that is all steel, and something like 90%+ of the parts are interchangeable/identical with a "real" Makarov. That is because it is made in the same factory as the Makarovs.

It uses a double stack width mag that holds both the BBs and the CO2 cartridge. The grips are real Makarov grips since the CO2 is actually a standard Makarov mag size, and held in by the standard heel release.

Is it the one like this one? I've brought two in 2008. I've had a fair bit of trouble clearing these through the customs in Toronto Airport....I don't think, that the most of the parts are interchangeble with PM though...Except, maybe , some trigger group parts.
DSCN1015.jpg

DSCN1020.jpg

DSCN1014.jpg
 
:O ok I'll admit thats pretty cool for an air pistol. how much dose that one in the picture dimon posted run a fellow?
 
Is it the one like this one? I've brought two in 2008. I've had a fair bit of trouble clearing these through the customs in Toronto Airport....I don't think, that the most of the parts are interchangeble with PM though...Except, maybe , some trigger group parts.

Yep, that is the one. Actually many parts are interchangeable, although I haven't tried, I do have a Makarov for comparison. Also, besides trigger parts, there isn't much more to the Makarov. It is a very simple pistol because it is a blowback design.

Some of the parts on mine are not all that well finished, such as fairly sharp edges on the trigger guard, etc. Apparently the earlier ones were finished much better.

Accuracy is pretty good if you use lead rather than steel BBs.
 
This is my review on my latest air pistol, the Makarov by Umarex.

Description: (From Umarex’s website)
The Makarov Air Gun fires steel BBs at a speed of 380 feet per second from its full-metal constructed frame. This double-/single-action pistol has a moveable slide and a drop-free 16-shot BB magazine. The Makarov PM is powered by a single 12 gram CO2 capsule that is concealed in the grip frame. A great practice pistol for Makarov owners and a great price for heavy metal constructed BB Gun.

Full metal construction
Slide manually moves for added realism
Double & Single action
Drop free 16-round magazine
CO2 Powered

The Russian designed Makarov, first developed in 1948, is based on the Walther PPK. This air pistol is all metal construction with plastic grips. The slide is moveable manually, however is not a blowback and will not operate when fired. The gun can be fired in both SA and DA but must be manually cocked each shot for SA. The weight and feel is similar to the real version. The CO2 and separate removable BB magazine are housed in the grip, the CO2 is accessed by sliding the grip rearward and the BB magazine is released out the bottom of the grip. For the most part the construction is solid, there is a bit of rattle in the slide but the barrel is separate and not effected.

Performance:
The gun shoots well and is consistent but shots seem to pull to the right everytime. The trigger pull is somewhat smooth is double action with about a ¾ inch pull but seems to stiffen up in SA. The thumb release safety located on the left side of the slide just forward of the hammer is stiff right out of the box but loosens up with use. When set in “safe” position, the trigger will not pull, the hammer cannot be cocked and the slide will not operate. Once the safety is set to “fire”, the hammer can be cocked either manually or by racking the slide. The safety lever also functions to lock the slide in the open position, by placing the safety in “fire”, racking the slide all the way back and then placing the safety on “safe” the slide will remain locked in the open position. Aiming down the sights can be difficult, even in moderate light, because of the very narrow front blade sight. I would recommend painting the front blade white for better visibility. Loading of the BBs into the magazine is greatly enhanced by the use of a speed loader. I use the one that came with one of my Marksman pistols, it is a simple piece of molded rubber tube with a squeeze point to release the BBs from the storage portion of the tube into the funnel shaped nozzle.

Overall I find this gun is fairly well built but definitely needs some changes to bring it up to the same quality of some of Umarex’s other models such as the HK P30. The all steel construction is a big plus, but the rattle in the slide, uneven trigger pull and the BBs pulling to the right are the things that bring the overall end quality of this gun down. The power is good at a rated 380 fps and shots per cylinder is high at around 80-100. If you are looking for an inexpensive low end gun that you can shoot all day for fairly cheap, the Makarov would be one of the better choices.

Update:

After having now fired off 2 CO2 cylinders and about 2 hundred rounds, the trigger pull has become a lot smother, the safety lever also operates much nicer and the shots, while still pulling to the right some, are starting to straighten out. My only issue with this gun now is the rattle in the rattle in the slide which could be resolved if Umarex were to modify the muzzle end of the slide on the inside so that it has a tighter fit around the barrel.
 
Joe, does it have a rifled barrel or it's a smoothbore? My Baikal doesn't shoot well with a rifled barrel and steel BB's....

It has a smooth bore. This gun can only shoot BBs therefore a rifled barrel is unecessary. Both my HK P30 and PX4 Storm have rifled barrels and are capable of firing both pellets and BBs, however I avoid using BBs in either of these because the rifling can/will be damaged over time with extended use of BBs.
 
I've seen one similar to the Umarex but branded Baikal. It appeared to be made from an actual Makarov with some of the guts of the frame milled out, a new barrel and the gas cylinder and pellet feeder fitted in a frame that fit in the mag well. It was a cool looking piece. The guy who was bringing them in couldn't get any more after the first and only shipment.
 
Back
Top Bottom