Ultimate 10/22 pics

2

22forever

CGN frequent flyer
Rating - 100%
22   0   0
Location
sechelt B.C.
Lets see your pics, always good to get more ideas for the next build.
This is my first build and it's almost completed.
Dlask 16" fluted target barrel
Dlask receiver
Dlask picatinny rail
Kidd 2 stage trigger set at 7/14 ounces
Kidd buffer and action pins
Revolution Yukon Extreme stock in cayenne
Leupold VX II 6-18X40 AO scope
Harris bipod
Just a couple more things to complete it will be a Kidd bolt, charging handle and spring kit.
P6190004.jpg

P6190003.jpg
 
DSCF1795.jpg


Bone Stock, and can shoot under an inch at 50 yards pretty consistently! I have yet to shoot it at 100 with any decent ammo though, but even with the crappy stuff I am getting under 2 inches. I find the trigger is really heavy though and am thinking of replacing the trigger components soon enough! I am sure that with some more trigger time an a little bit lighter trigger it will shoot 1 MOA.
 
Very nice! I hope I can get close to that! Anyone know whats the best way to get a lighter pull outta the stock trigger group, or where to get some replacement parts? I dont wanna spend $300 bucks on a whole new trigger group, just replace a couple parts!
 
Heres mine, pretty basic older 10/22. My father refinished it for me when I was a kid, he sanded everything down and polished the receiver/trigger group, sanded the stock down to refinish it but we liked the colour that came out of it so he laquered it. The original barrel was too pitted to re-blue so he spray painted it, then added the scope rail and a simmons 4x28 scope, along with the sling swivels and a camo sling. Recently I swapped the scope out for a Bushnell 3-9x32 and found a nice black leather sling with the Ruger logo and name embossed in it. And just last week I got a brand new stainless barrel off a fellow CGNer. Havent had it out with the new barrel and scope yet. O BTW, the rifle was refinished after its life on a fishing boat was nearly ended when my friend's father's boat went down. Tragically he lost his father, but he had no interest in the rifle after the divers brought it back up with any other valuables, so he gave it to me. It was my first and will be my childrens first when that day comes.
0616001938a.jpg
 
mine

Here are pics of my latest,
Boyd's Cuda
Razor receiver
RT Quantum Barrel w/ RT muzzle break
RT Trigger housing, trigger made by me
Bolt handle by me
RT pull release
pillar bedded
A1 Optics 8-32x50
insanely accurate, no pics but recently shot a 3/8 group at 50 with Xperts
HPIM0728.jpg

HPIM0736.jpg

HPIM0735.jpg

HPIM0734.jpg
 
Nice rifles guy's. My 2 favorite laminats are Cayenne and Birchell.
I like the RT Barrel and trigger housing 10mark22. You must have been in cahoots with Skeeter. Very sneaky :D
 
parts

Thanks Bullseye, yes, I know Greg personally. His barrels seem expensive, but when you take into account that they are molyfusioned, hand lapped, and tested, they are a steal. It is by far the most accurate bbl I own. They need to be available here. I have more, here is a sample, top is the RT unit, second is a rifle built for a friend, bottom 2 are my son's rifles, bottom pic is rifle I built the barrel from a blank, 16" heavy taper. Later.
HPIM0683.jpg

HPIM0558.jpg
 
You must log in or register to reply here.
Back
Top Bottom