heavy barrel on 10/22 carbine

[klashnikov]

I have a 10/22 carbine with a 16" tapered barrel and would like to know if a Dlask 12" heavy barrel that is untapered would fit. The dlask barrel has a diameter of .920" Anyone have any experience with this?

 

[bear.23]

Fit the receiver or fit the stock?
The receiver most likely.. the stock probably not..

 

[Clobbersauras]

I have a 10/22 carbine with a 16" tapered barrel and would like to know if a Dlask 12" heavy barrel that is untapered would fit. The dlask barrel has a diameter of .920" Anyone have any experience with this?

It's fairly easy to sand the barrel channel of your stock out so that it fits, but remember to leave a pressure pad at the end of the stock for the barrel to rest on. Free floating a 10/22 barrel with a standard receiver will not give you the results you are looking for and can result in barrel droop.

 

[Dr.Lector]

Buy the Dlask tapered (factory profile) from the new production, so you
don't have to sand anything.
They will be out in about a week.

 

[ntm]

Buy the Dlask tapered (factory profile) from the new production, so you
don't have to sand anything.
They will be out in about a week.

Are they going to be bentz chambered and threaded at the muzzle as well ?

A 16" like that is exactly what I've been wanting.
The .920 barrels are too darn heavy when combined with a nordic stock.

 

[Dr.Lector]

Yes, threaded and the chamber is Bentz-based.

Be careful, the Nordic (as sold by Ruger on their SR-22) has the
barrel support block made for .750".
If you want to use .920" barrel, you will have to have that block modified.
If you want to use a barrel with a factory profile, then
you have to fit something between he barrel and the block
(like mouse pad, bicycle inner tube, etc).

 

[ntm]

I'm using a 12" dlask right now with a sims vibration damper on it that fits tightly inside the forearm.

 

[ntm]

Where's them 16" factory profile barrels ?
I've been holding my breath

 

[Dr.Lector]

I think they will come in about a month or so.


The next one (maybe next week) will be a 12.5"
profiled like the barrel for SR-22 (.750" in diameter).

 

[ntm]

Ah, right on !
Thanks for the update.
And a big thanks to dlask for cooking up these great 10/22 products !