[FONT=Arial, Helvetica, sans-serif]From the tireless research I have done on the "perfect" sight for my M4 it looks like the Schmidt & Bender Short Dot is the front runner. Any dealers here carry it? How much $$$, the article below says around $2000 is this just in the US or similar up here?[/FONT]
TIA
[FONT=Arial, Helvetica, sans-serif]Schmidt & Bender Short Dot and Zenith models[/FONT]
[FONT=Arial, Helvetica, sans-serif]An overview with pictures [/FONT]
Two versions of Schmidt and Bender scopes. A Zenith 1.1–4 x 24 and a 1.1-4x20 Short Dot. Both are very high quality scopes made by Schmidt and Bender. Here is a quick review of their features and some pictures of them[FONT=Arial, Helvetica, sans-serif]An overview with pictures [/FONT]
Two versions of Schmidt and Bender scopes. A Zenith 1.1–4 x 24 and a 1.1-4x20 Short Dot Scope and two styles of LaRue Tactical quick release Scope Mounts. The rifle on the left (tan) has a taller scope mount to work with goggles, night vision, etc
These are two very high quality scopes and very sturdy mounts. The scopes run over $2000 each and the mounts are each around $200
CQB reticle Designed specifically for our 1.1–4 x 20 CQB scope, this sophisticated reticle is extremely fine at low magnifications, obscuring almost none of the target, while the detailed center section becomes useable for precise rangefinding at higher magnifications. This optic has a blue tint, however is just as crisp and sharp as the other version. It is simply a color change between the two
Reticle No. 2 FlashDot Our newest Flash Dot technology provides three different illumination levels, completely controllable in a separate turret. Stops 1 to 3 provide varying illumination intensities at very low levels, designed for use with night vision goggles. Stops 4 to 6 provide slightly higher levels of intensity to be used by the naked eye in low light conditions, allowing the shooter to determine the precise aim point against a dark target that would obscure non-illuminated reticles. Stops 7 through 11 illuminate the center dot to very high intensities. With illumination switched off, the CQB functions as a standard scope with non-illuminated crosshairs. This version is much clearer
A digital chip automatically switches off the power after six hours of non-use. Just in case, an extra battery can be stored under the cover of the windage adjustment turret.
MInor changes between the two versions of this scope are the reticle, magnification, lens color, dials and caps
Schmidt and Bender Zenith 1.1–4 x 24 Scope with LaRue Tactical SPR / M4 Scope Mount (QD LT-104) This is absolutely the best mount made for putting a high power glass onto a flattop style AR-15, period. The cantilever throws the scope out front, allowing you to get the right eye relief
Schmidt & Bender 1.1–4 x 20 Short Dot and LaRue Tactical SPR / M4 1.93" Mount (QD LT-135) This is a continuation of the SPR mount, except it is 1.93" above the rail in order to get the S&B ShortDot up above a PEQ-2... It is as simple as that.
Both sides of these two systems next to each other
Shooting these scopes is easy and comfortable on both of the LaRue mounts
From the Schmidt & Bender websiteZenith 1.1–4 x 24
There is no better choice for dangerous or fast-moving game at close quarters. At lower magnification, an exceptionally wide field of view (36m/100m or 36 yds/100yds) allows you to keep both eyes open while placing a precise shot. The reticle is located in the second focal plane, so its size remains constant throughout the magnification range
1.1–4 x 20 Short Dot
At lower magnification levels, the Short Dot can be sighted with both eyes open. The full magnification range can be covered in a single 180-degree turn. Available with special CQB and No. 7 reticles
