having bought a Nagant 1895 Revolver....i noticed the lack of ammo so i bought casings,bullets dies etc....however i can't find any reloading data inre: powder types....max. and min. grains etc... any help would be appreciated....thx....Wolf
anyone have loading data for 7.62x38R
- Thread starter wolf19534
- Start date
This is my load. I do not recommend anybody use it without proper consideration.
100g .32 cal DEWC resized to .3085
6.og H110 powder
Fiochhi Nagant Cases
CCI small pistol primers
In my Nagant this is an accurate load that I find lighter than factory fodder. Be careful in seating bullets. I built a seating die to seat the bullets below the case mouth before using the Lee seating die to crimp the case mouth. This kept me from crushing cases using just the Lee seating die to both seat and crimp in one step.
100g .32 cal DEWC resized to .3085
6.og H110 powder
Fiochhi Nagant Cases
CCI small pistol primers
In my Nagant this is an accurate load that I find lighter than factory fodder. Be careful in seating bullets. I built a seating die to seat the bullets below the case mouth before using the Lee seating die to crimp the case mouth. This kept me from crushing cases using just the Lee seating die to both seat and crimp in one step.
Thanks I have been thinking of Bullseye but could not find a start point. Cast or jacketed bulletts? CraigOry just read your other thread Great pics Thanks.
Last edited:
