AT15 Gen 3 are ready to go

Got the new uppers back from Ano a couple hours ago so just HAD to put my 300 Whisper together:dancingbanana:

IMG_2466.jpg



IMG_2465.jpg



IMG_2471.jpg



We came in pretty close to budget at $425.00 for the upper complete with forward assist and dust cover.
These uppers are the same 7075 billet that we make our lowers from and like our lowers have much tighter tolerances than mil spec, they also weigh a few ounces more than every other upper we could find to weigh:D
 
Got the new uppers back from Ano a couple hours ago so just HAD to put my 300 Whisper together:dancingbanana:

...

We came in pretty close to budget at $425.00 for the upper complete with forward assist and dust cover.
These uppers are the same 7075 billet that we make our lowers from and like our lowers have much tighter tolerances than mil spec, they also weigh a few ounces more than every other upper we could find to weigh:D

Hmmm... Beautiful!

I know what upper I'll be using!
 
how many uppers are you getting in? how long does it take to sell them?

We are making them in bigger production runs now that we feel we have them perfected. How long until we sell out what we have made to date is anyone's guess, with back to back gun shows this next 2 weekends I hope to be sold out.

Not to fear though more material is enroute and we will be turning it into chips with uppers hidden in the middle as soon as the bar stock shows up.:D
 
We are making them in bigger production runs now that we feel we have them perfected. How long until we sell out what we have made to date is anyone's guess, with back to back gun shows this next 2 weekends I hope to be sold out.

Not to fear though more material is enroute and we will be turning it into chips with uppers hidden in the middle as soon as the bar stock shows up.:D

Do you have a rough ETA on the next batch? Somehow I have a feeling I might not be able to make it into this batch.
 
Do you have a rough ETA on the next batch? Somehow I have a feeling I might not be able to make it into this batch.

We will most likely be running more in 2 weeks as they seem to be leaving here pretty fast, with back to back gun shows the next 2 weekends I am pretty sure as soon as we are done the shows it will be time to run more.
Material is here, just need longer days.


More upper Pics as promised

IMG_2478.jpg


IMG_2477.jpg


IMG_2476.jpg


IMG_2475.jpg


IMG_2473.jpg
 
Last edited:
Would it be possible to get the "Alberta Tactical Rifle" on the same face as the maple leaf and "Canada" but on the other side of the bolt release cut out?

Edit: Those are so gorgeous I can't wait to get one!
 
Would it be possible to get the "Alberta Tactical Rifle" on the same face as the maple leaf and "Canada" but on the other side of the bolt release cut out?

Edit: Those are so gorgeous I can't wait to get one!

It would mean making another fixture and we looked the upper every way possible for where the best places to engrave would be and on the port side is just not a place that it would be viable to engrave on.
Opposite the bolt release is the port, getting an engraving tool in around the FA and shell deflector would be problematic as well.
 
It would mean making another fixture and we looked the upper every way possible for where the best places to engrave would be and on the port side is just not a place that it would be viable to engrave on.
Opposite the bolt release is the port, getting an engraving tool in around the FA and shell deflector would be problematic as well.

I think I may not have explained myself correctly. I take it you understood me as meaning on the ejector side?

Where you have the Maple leaf and Canada, that face, plane, or flat on the left side... whatever you want to call it, just on the rear most side of the bolt release notch. So basically the text is on one line, instead of two.

Doesn't matter though, just curious!
 
I think I may not have explained myself correctly. I take it you understood me as meaning on the ejector side?

Where you have the Maple leaf and Canada, that face, plane, or flat on the left side... whatever you want to call it, just on the rear most side of the bolt release notch. So basically the text is on one line, instead of two.

Doesn't matter though, just curious!

You are correct I did mis-understand
Yes we could do it all on the same line but would need to shrink the size of the leaf.
At this time we could only do this on an already anoed upper, but could on special order do 1 in the next run of uppers prior to ano for the all black look.
 
I just picked up my lower from the post office today... all I can say is WOW!

I really am looking forward to getting more parts to put this AR together, but just the lower itself is so gorgeous!
 
Back
Top Bottom