Solid (NOT BALOON HEAD) 12 Gauge brass

[fat tony]

Where can you get someone in Canada who will machine 50 bmg cases to accept at 12 gauge rim? If there is an entity who does that, will it cost your first born child plus your left arm to get say 20 cases done?

 

[sunray]

Hi. Typical machine shop rates are over $100 per hour plus set up time.
Bertram 12 guage brass runs $78.95 per 20 from Shooter's Choice, in Waterloo, Ontario. About the same as ready-to-load .50 BMG brass from Alberta Tactical.
Doubt .50 BMG brass is thick enough anyway.

 

[fat tony]

Hi. Typical machine shop rates are over $100 per hour plus set up time.
Bertram 12 guage brass runs $78.95 per 20 from Shooter's Choice, in Waterloo, Ontario. About the same as ready-to-load .50 BMG brass from Alberta Tactical.
Doubt .50 BMG brass is thick enough anyway.

^Thanks for the tip on the Bertram brass, it looks like good stuff.

 

[mckutzy]

A member here and on many other forums of the 'net, Ed Hubel- hubel458, has done some extensive research apparently on these cases with turned and made rims. A suggestion might be if still interested, to contact him about your project and im sure he might be of service to you.
http://www.canadiangunnutz.com/forum/showthread.php?t=77687

 

[fat tony]

RE: Ed: ^Border issues. This is where I got the idea from, but he has a big network 'helping him out' (stateside, and he is stateside) . I don't have that network, the RMC cases are verboten, so the Bertram cases will suffice.