Where are you, my love?

[Wally]

Falcon 1.5-5x32 and 4 PMAGs but there is something missing... I feel so empty inside....

I Tried to mount the scope and the mags on a stack of $100 bills but it just wasn't the same.

[youtube]ujnH4yNqL8E[/youtube]

 

[macsailer]

i am in the exact same boat as you, waiting at the post office...

pmags & scope standing by...maybe i should buy rings in the meantime. hopefully here this month

 

[Wally]

i am in the exact same boat as you, waiting at the post office...

pmags & scope standing by...maybe i should buy rings in the meantime. hopefully here this month

I've got my rings all picked out... just don't know what height to get until the rifle gets here.

 

[Epoxy7]

It'll be interesting to see what the accuracy is like with the XCR-M.
If I were to ever get one, I'd want it to look like this. Only with the 18.6" heavy barrel.

They have a build your own section on the Robertson Arms page. The green looks horrible. The tan looks really good and the black looks decent. They have a heavy barrel option and a lighter barrel. Plus 18.6" from the factory.

 

[Wally]

Pretty cool... I've just gotta say, I'm pissed off about getting the ####ty tubular stock... I want the new one...

 

[macsailer]

i guess you can thank the US department of state for that one...


I am trying to get one of the ACR to XCR stock adapter's up here, when they prove available. That might be the best interim solution.

Pretty cool... I've just gotta say, I'm pissed off about getting the s**tty tubular stock... I want the new one...

 

[blaxsun]

I Still Like the SCAR

 

[ESQ]

I'm sure we'll see the XCR long before the RCMP stops dicking with the SCAR.

I want a SCAR, too.

 

[Wally]

i guess you can thank the US department of state for that one...


I am trying to get one of the ACR to XCR stock adapter's up here, when they prove available. That might be the best interim solution.

$$$$$$$$$$$$$$$$$$$$$$$$$$$$

Again.... $$$$$$$$$$$$$$$$$$$$$

I like the SCAR platform but not enough to pay TWICE as much as an XCR...

 

[ndb86]

I feel so empty inside....

 

[Epoxy7]

$$$$$$$$$$$$$$$$$$$$$$$$$$$$

Again.... $$$$$$$$$$$$$$$$$$$$$

I like the SCAR platform but not enough to pay TWICE as much as an XCR...

I do prefer the SCAR. If it were a choice between the two I'd pay more and get the SCAR. I think it's safe to say the XCR will get here first. Who knows what will happen with the SCAR. It is a shame they still have the crappy regular stock for the XCR though. Yes US export rules area a pain.

 

[Throttle_monkey1]

Is it a no go because it's folding or collapsible? Or both?

 

[Boomer686]

... just don't know what height to get until the rifle gets here.

Why? The Obj diameter +6mm divided by 2 will give you the height to center then order the rings accordingly.

Using TPS rings as an example: 44mm Obj + 6mm /2 = 25mm to center and would mean that low rings would work.

Its got a flat top; no taper, no sights etc that will touch the Obj lens. Charging handle is not like the AR series so that's not an issue either. Personal preference will tell you if you normally prefer hunkering down tight on the stock or if you prefer a more relaxed posture requiring medium rings in this case.

At least then the rings will be here for when your gun arrives.

Just my $0.02

Regards,

 

[Wally]

Why? The Obj diameter +6mm divided by 2 will give you the height to center then order the rings accordingly.

Using TPS rings as an example: 44mm Obj + 6mm /2 = 25mm to center and would mean that low rings would work.

Its got a flat top; no taper, no sights etc that will touch the Obj lens. Charging handle is not like the AR series so that's not an issue either. Personal preference will tell you if you normally prefer hunkering down tight on the stock or if you prefer a more relaxed posture requiring medium rings in this case.

At least then the rings will be here for when your gun arrives.

Just my $0.02

Regards,

Would like it to clear the foldable sights

 

[Boomer686]

Would like it to clear the foldable sights

Ok so take that height into account as well. Not too difficult to do at all. Either way if you are more comfortable waiting then so be it.

Regards,

 

[Wally]

OK, Seriously, where are these f'n things?

 

[pac_man]

You guys are ***holes posting high quality pictures like that. I thought I was done feeding my black rifle addiction for a while. Guess I should buy some Pmags and just buy one too. Can't fight temptation.

 

[CarbineOne]

Is it a no go because it's folding or collapsible? Or both?

Considered a 'major implement of war'

 

[m_falafel]

I do prefer the SCAR. If it were a choice between the two I'd pay more and get the SCAR. I think it's safe to say the XCR will get here first. Who knows what will happen with the SCAR. It is a shame they still have the crappy regular stock for the XCR though. Yes US export rules area a pain.

Just sayin' but there is one for sale in the ee...

 

[Hotwheels81]

Just sayin' but there is one for sale in the ee...

yeeaaahhh... pending issue of the SCAR's FRT by the RCMP.... and $7500... i'd rather have 2 XCR's.... my L and the new M.... both with the SCAR's butt stock... both non restricted... and spend the extra $2000 on mags and ammo .... just sayin ...

the SCAR is badass tho... if it was priced around $2500 i would have one in the safe!