10 Rnd LAR-15 Mags In-Stock

Questar said:
Then sell all your guns because rumours have been floating for years that Canada is going to ban ALL civilian ownership of firearms... wait, lets ask if anyone can confirm it ;)

Mark
Click to expand...

It's on the Internet! It must be true. Oh, wait. So is the "Add to Cart" button.
:cool:
 
Tuco Pike said:
SLIDE THE EXISTING FLOOR PLATE OFF BEING MINDFUL OF THE SPRING. Then slide the coupler on in its place. Repeat for second magazine. To take the old one off, you need to apply upward pressure to get past the little divot. I use an "all" in the little hole, some folks use a little micro screw driver under the lip. Easy peezey lemon squeezey.
Click to expand...

Thank you for your instructions Tuco. I stared at mine for a good ten minutes before I found your instructions.
 
I am finding these mags are a bit harsh on the edges of the mags. Not feeding great and scratch the hey out of the brass. Read that the front of the mags need to be filed and the other sharp edges could use a bit of emery cloth. Am I the only one finding these issue?

Don't want to over file and cause grief but they don'"t slide forward easily, hang up on the brass on the way out!

Bit off assistance would be appreciated. Posted elsewhere on the forum but I lost track of it and got busy.
 
corney said:
I am finding these mags are a bit harsh on the edges of the mags. Not feeding great and scratch the hey out of the brass. Read that the front of the mags need to be filed and the other sharp edges could use a bit of emery cloth. Am I the only one finding these issue?

Don't want to over file and cause grief but they don'"t slide forward easily, hang up on the brass on the way out!

Bit off assistance would be appreciated. Posted elsewhere on the forum but I lost track of it and got busy.
Click to expand...

If you have any issues with mags purchased from Questar then please contact our office by email: Sales@Questar.ca

Make Scott aware of the problem and he will assist you and get it resolved.
 
Questar said:
If you have any issues with mags purchased from Questar then please contact our office by email: Sales@Questar.ca

Make Scott aware of the problem and he will assist you and get it resolved.
Click to expand...

Well thanks for that and I will when I get a chance to really try them out. Service has been great to date!
 
You must log in or register to reply here.
Back
Top Bottom