Wads for 7/8oz reloads?

[datatools]

I would like to reconfigure my Ponsness to reload 12guage 7/8oz loads. I already have the correct shot and powder bushings, the only thing I cant find is wads for 7/8oz loads. Does anyone know where I can order this size wads? Thanks.

 

[3macs1]

I would like to reconfigure my Ponsness to reload 12guage 7/8oz loads. I already have the correct shot and powder bushings, the only thing I cant find is wads for 7/8oz loads. Does anyone know where I can order this size wads? Thanks.

Use the gray winchesters. Most gun shops have them WAA12L
http://www.winchester.com/products/components/wads-shot/winchester-wads/Pages/winchester-wads.aspx

 

[R&R Rancher]

Use the gray winchesters. Most gun shops have them WAA12L
http://www.winchester.com/products/components/wads-shot/winchester-wads/Pages/winchester-wads.aspx

+1.

I've shot several thousand loads using that wad with several powder/primer/hull combinations. Great target loads. Low recoil and CRUSH targets!

 

[dfritter1]

I use the clones; they work just as well for me in Win AA hulls with Clays powder.

 

[Beretta687EELL]

Claybuster

 

[datatools]

Thanks, this is what I needed to know.

Use the gray winchesters. Most gun shops have them WAA12L
http://www.winchester.com/products/components/wads-shot/winchester-wads/Pages/winchester-wads.aspx

 

[beretta boy]

I've used the Claybuster CB2100-12 in Fed. GM cases and the CB4100-12B (Lightning)
CB0178-12 and CB100-12 in 12 gauge for both hot 24gram & light 7/8 oz.loads in old style AA hulls. All work well, but I have a preference for the CB4100-12B "Windjammer" clones.

 

[datatools]

I've used the Claybuster CB2100-12 in Fed. GM cases and the CB4100-12B (Lightning)
CB0178-12 and CB100-12 in 12 gauge for both hot 24gram & light 7/8 oz.loads in old style AA hulls. All work well, but I have a preference for the CB4100-12B "Windjammer" clones.

Where are you getting the Claybuster wads from? I would like to order some if possible. Thanks.

 

[Covey Ridge]

I have found that one oz. wads like the WAA12SL (pink) and the CB 1100-12 work well. I actually prefer these wads over the 7/8 gray wads as I am able to get a better component fit and crimps stay put. I use a pw loader. I have used Alliant and Hodgdon data.

 

[Beretta687EELL]

Here is a link to the Claybuster web site http://www.claybusterwads.com/ Contact them and ask who carries their wads close by you.

 

[brybenn]

I use the grey claybuster wads. Work amazing

 

[beretta boy]

Where are you getting the Claybuster wads from? I would like to order some if possible. Thanks.

Sorry, out hunting for a couple of days. Epps ... just 20 minutes away.

I'm sure some of the better gunshops in AB must carry them.