Stock 3 to P19L parts interchangability

[warlordof3]

Just wondering if the Stock 3 trigger is that much better than my P19L and if so would it retrofit into my P19L? If so do you have access to Stock 3 trigger groups and if so how much? Stock 3 looks to take small frame mags and looks very similar to my P19L. Thanks in advance for your time.

 

[katana_1127]

Hi,
everything seems the same, here are some pics, with the 2 Tangs side-by-side:

Robert
katana_1127@hotmail.com

 

[maurice]

One sear appears blued...the other silvery in color. The one on the right appears to be a newer sear design.

 

[warlordof3]

Hi katana,thanks for posting the pics of the 2 guns sidexside - I'd bet dollars to donuts that they would swap parts back and forth. How's the trigger feel between the 2 guns - is the stock 3 that much better?
Regards - Jamey

 

[katana_1127]

The trigger is little bit better in double action on tbe Stock 3.

QUOTE=warlordof3;6231773]Hi katana,thanks for posting the pics of the 2 guns sidexside - I'd bet dollars to donuts that they would swap parts back and forth. How's the trigger feel between the 2 guns - is the stock 3 that much better?
Regards - Jamey[/QUOTE]

 

[Freedom Ventures]

Sorry for the delayed response - the World Shoot had me going in 8 different directions at once - but I'm finally home and it's over.

Yes, the Stock III sear assy can be fitted in a L or Combat or a Stock II or Stock. (And it remains production legal too) - You have to buy a whole new sear, Trigger Bow, and FP Safety Activator.

It's $125 ++. Unless you've gutted your sear cage a few times, I don't recomment taking this on yourself. We can do the installation for you, no labor charge - just the cost of the parts and shipping of the gun.

 

[maurice]

I'll take a kit. I'll pick it up at the AMA match on the 30th,,,!

 

[warlordof3]

Sorry for the delayed response - the World Shoot had me going in 8 different directions at once - but I'm finally home and it's over.

Yes, the Stock III sear assy can be fitted in a L or Combat or a Stock II or Stock. (And it remains production legal too) - You have to buy a whole new sear, Trigger Bow, and FP Safety Activator.

It's $125 ++. Unless you've gutted your sear cage a few times, I don't recomment taking this on yourself. We can do the installation for you, no labor charge - just the cost of the parts and shipping of the gun.

Would the Stock III trigger group be drop in turn key ready or might a person have to do some fitting?

 

[Freedom Ventures]

Would the Stock III trigger group be drop in turn key ready or might a person have to do some fitting?

Parts would require minor fitting and you'd really have to be intimate with the workings of the CZ design sear cage, trigger and double action system to install.

 

[maurice]

I will let you know how it works in my stock2,...Sean is installing one.

 

[warlordof3]

I will let you know how it works in my stock2,...Sean is installing one.

Thanks Maurice, I'd be very interested - although you may not see as much of a difference because I'm assuming your stock2 trigger is a lot nicer to begin with than my P19L.

 

[maurice]

It is better than before, that i am sure of...barely an audible click when dryfiring for the reset.
I highly recommend...da IS smoother....sa is about 2.5lbs.