plainsman 865 troubleshooting

[hacer2]

hey guys my cousin has an old H&R plainsman 865 but its missing the magazine. I found parts for the rifle on numrich but im kinda getting lots on the schematics. here is the link for the parts http://www.gunpartscorp.com/catalog/Search.aspx?filter=plainsman&catid=8006
pictures will show what i have if someone can tell me what im missing to be able to reinstall the magazine it would be great!











for more pics or specific pics just say so Good luck!

 

[kayceel]

H&R Model 865 Plainsman- Missing Mag Parts

This appears to be the earlier curved mag rifle ( one piece metal trigger guard & mag. base plate). From the Numrich schematic the following parts are missing:
1125520A, 284320A, 285080B, 284300A, 284340A, 284410A, 284420A, 284430A and the curved mag., Part No. 128310F.
Canadian sources in the East I am not aware of but you can try a WTB parts listing in the EE Rimfire section or Western GunParts in Edmonton.
GOOD LUCK! Kayceel

 

[hacer2]

This appears to be the earlier curved mag rifle ( one piece metal trigger guard & mag. base plate). From the Numrich schematic the following parts are missing:
1125520A, 284320A, 285080B, 284300A, 284340A, 284410A, 284420A, 284430A and the curved mag., Part No. 128310F.
Canadian sources in the East I am not aware of but you can try a WTB parts listing in the EE Rimfire section or Western GunParts in Edmonton.
GOOD LUCK! Kayceel

Thanks for taking the time to help me with this fixer upper project.

 

[ghostntheshell]

I have one of these rifles. Mine was very accurate. Then, for reasons I'd rather not discuss - someone accidentally threw my bolt in the garbage..

So now I need to find another bolt.

 

[hacer2]

I have one of these rifles. Mine was very accurate. Then, for reasons I'd rather not discuss - someone accidentally threw my bolt in the garbage..

So now I need to find another bolt.

ouch thats rough so ive manage to fix on another mag assembly and all was not too hard minus the fact the mag was a bi*** to stick in the i moved some things around but now the bolt wont extract the rounds but from what i see the chamber may be warped or something because the rounds are a very hard push into the chamber and a even harder pull out 3/4 off the rounds wont extract i need a push road to take em out so yea...

SOLVED!