Ax Project

[gadget]

Started life as a Remington 700P with a 26 inch barrel, Casey at Tactical Ordnance then started his magic - barrel cut & recrowned to 18.5 inches, oversize bolt handled installed, Surefire muzzle brake, Accuracy International Ax chassis, ADM scope mount, Nightforce 3.5-15x50 NXS Mildot, refinished in OD green.

gadget

 

[GunBoy]

Wow nice, very nice!

 

[PrairieSniper]

That's a great looking rifle. Have you had a chance to take it out yet?

 

[Cpt.Flan]

He/you forgot to install the "ring" clamp over the front part of the action. Right behind the rail tube and in front of the action scope rail. That part actually make sure your recoil lug is locked to the chassis.

I will post a picture of mine.

This chassis is very nice. Feel good and shoots good.

 

[gadget]

That's a great looking rifle. Have you had a chance to take it out yet?

The rifle had originally been in a HS Precision stock with the VBull Precision magazine system, it would consistently shoot 3/4 MOA or better at 100 meters using RUAG Swiss P Match. I hope to get the rifle out in the next couple of weeks, in the hands of a better shooter then me, the gun fired several groups that measured roughly 3 3/4 to 4 inches at 500 meters.

gadget

 

[gadget]

He forgot to install the "ring" clamp over the front part of the action. Right behind the rail tube and in front of the cation scope rail. That part actually make sure your recoil lug is locked to the chassis.

I will post later a picture of mine.

Glad you told me I installed what I had received from Wolverine

gadget

 

[Cpt.Flan]

Ok here's a few pictures of mine. Scope is off. I had to swap to try it with something different.

In the first picture you see the "ring that covers the action recoil lug between the rail and the hand guard tube.

I really enjoy shooting this rifle. Really. High quality no doubts.

Cheers.

 

[Cpt.Flan]

Glad you told me I installed what I had received from Wolverine

gadget

Oh ok! I was missing parts 5 months ago myself... Just got the 20MOA rail 1 month ago...

You will have to uninstall everything again to put that part on. Barrel, unmount the action and everything... Hope you don't have too much loctite in there...

Well gratz on the chassis! Very ###y man!

Hey Todd had only but really really good comments on this new chassis. Good enough for him, good enough for me...