Question about G17 trigger job issue

[FastFord58]

Just did a 3.5lb connector and wolff spring kit, which went swimmingly.

But now when I rack the slide, the trigger doesn't reset to a point where the trigger safety activates. The trigger itself resets to firing position, but it is just a hair off for the safety.

Is this a common issue, or should I be looking into it further?

 

[SLANTO]

I had this issue and it came down to lubing the area where the connector is

 

[FastFord58]

Oiled it up, works great.

Thanks!

 

[SlimTim]

This can happen sometimes with the lighter striker spring installed along with the comp trigger spring. If oiling it doesnt work try going back to your stock striker spring and see if that works.

 

[Trigun]

Just did a 3.5lb connector and wolff spring kit, which went swimmingly.

But now when I rack the slide, the trigger doesn't reset to a point where the trigger safety activates. The trigger itself resets to firing position, but it is just a hair off for the safety.

Is this a common issue, or should I be looking into it further?

If I remember right, the trigger spring has direction and has to put in the right way. Do a youtube search Glock 0.2 cents trigger job.

Trigun