Where to Buy CZ452 Scope Rings and Mount

[Rupert]

Anybody know where to find mount and rings for a CZ452?

Thanks,
Rupert

 

[SigWig]

I sure hope the dealers up top selling CZ firearms can help you out. Wolverine would be my first start.

 

[Rupert]

I sure hope the dealers up top selling CZ firearms can help you out. Wolverine would be my first start.

There is nothing on their website unless I overlooked it?

Frontier also sell CZ rifles but there aren't any rings/mounts on their website either.

 

[SigWig]

Sorry I should have said give them a call or send an email. Wolverine is still improving their site and I don't think it is accurate as to exactly what they have in stock.

 

[zywina]

If you have a problem with ordering correct CZ Check rings and mounts, give GMK Armouries a try, they can get what you need, www.gmkarms.com ,DZ!

 

[Archer Sam]

Gagnon Sports in Oshawa had a few sets when I was in there a couple of weeks ago. Not sure what height they were

 

[Easterner]

http://www.bkltech.com/Scope-Rings-and-Mounts-s/2.htm

I like my BKL's, their split dovetail mount always goes on straight.
They are a bit high, but one of the few 30mm sets around.

 

[dizzy]

talley manufacturing out of the U.S. they ship direct and fast. Nothing like buying right from the ring maker themselves.

 

[johNTO]

Rupert,
Take a drive up to Target Sports or call them. I saw a set on the weekend but not sure on the height.

 

[Grizzlypeg]

Talley's are nice. I got them from Prophet River Firearms. I have also used Leupold 3/8 rings. None of the CZ 45X series guns I've had needed mounts, just rings. They have a dovetail machined into them, but be sure to verify the correct size, as it varies and sometimes doesn't even follow the factory chart. Also, not all 3/8 rings fit the 3/8 base, as the angles are unique on the CZ.

 

[jperos]

I've ordered all my CZ scope mounts from Brownell's. I have Warne rings on all my CZ's.

 

[Rupert]

Thanks everyone for all the advice!

 

[murat]

try cz webshop from Prague, they are not the cheapest but have everything

 

[Nupes]

You can get the J&P Delrin adapters that convert to weaver mount and use the Burris Signature Zee's. I use the set up on my 455 and it works well. The Sig Zee's are the cats whiskers for mounts. They put no marks or torque on the scope tube and have interchangeable inserts of various MOA increments. These are used to put the POI in line with a centered reticle.

https://www.jnpgunsprings.com/index.php?cPath=10

 

[JADER]

I just ordered a set of bkl257 from bkltech.com

 

[cal_h]

hi
the cz 452 amercian takes 3/8 dovetail mounts most others take 11 mm
there was a list on one of the sites but i can't find it right now

luck
cal

 

[jaybird]

After reading feedbacks on rimfirecentral on rings and mounts for the CZ's I decided to go with a set of Warne rings for my CZ452 American.

 

[Farlsincharge]

Talley's are nice. I got them from Prophet River Firearms. I have also used Leupold 3/8 rings. None of the CZ 45X series guns I've had needed mounts, just rings. They have a dovetail machined into them, but be sure to verify the correct size, as it varies and sometimes doesn't even follow the factory chart. Also, not all 3/8 rings fit the 3/8 base, as the angles are unique on the CZ.

THANK YOU. I can't believe how many cz's I have seen with the scope off center and barely gripping the dovetail. People refuse to believe me that the dovetails are all over the map.

Whatever rings you guys go with, check the dovetail mating surfaces and the centering of the scope after.

I bought a rail from evolution gun works that was machined especially for the american's bastard 3/8 dovetail.