Ultimate Cliploader, who stocks it?

Denich

Denich

CGN Regular
Rating - 100%
24   0   0
Location
Burlington, ON
Who in canada has the Ultimate Cliploader in stock?? (for ruger mk3)


Went to the range today and realized that i only put about 40 rounds through the ruger just because i HATE loading those little .22 magazines. Id prefer to shoot it a bit more to go easier on the wallet..... I need it ASAP i booked next week off to go shoot hehe.

Where did you get your from?
 
Go on Ruger's on-line shop and have a look at their loader. It is a small diamond shaped tool that fits over the mag to hold the follower down. I have one and it works like a charm.
I did have a ''ultimate cliploader" but found it way too bulky, taking too much room up in my range bag. YMMV, of course.
 
yea ive seen those before. I do the same with an empty 22 casing. push down on that follower button and hold it down with that casing, saves my thumb like there is no tomorrow. its dropping the rounds in that annoys me for some reason, takes longer than i want.

As for bulky, doesnt really bother me, i take a couple of bags to the range anyways so i have room.
 
You could probably make one from a piece of 3/8" hardwood. Drill a few holes of the appropriate size (ie magazine width), to make the slot, and round the edges of the outside of the block and you're set to go.

I've been thinking of doing this myself for some time for mine.

:) Stuart
 
josquin said:
You could probably make one from a piece of 3/8" hardwood. Drill a few holes of the appropriate size (ie magazine width), to make the slot, and round the edges of the outside of the block and you're set to go.

I've been thinking of doing this myself for some time for mine.

:) Stuart
Click to expand...

You are thinking of the one that bollox posted

However if you can make this out of hardwood you are king and i bow down to you :D:D:D

p_100000619_1.jpg
 
I bought mine at
http://zaliznockindustries.com/outdoors.htm
19.95$ + 15$ shipping USPS.
Delivery took less than 1 week
Very happy with it
 
Denich said:
You are thinking of the one that bollox posted

However if you can make this out of hardwood you are king and i bow down to you :D:D:D

p_100000619_1.jpg
Click to expand...

I don't recall Bollox's home-made one, but you can save yourself unnecessary grovelling as I won't be able to duplicate the one in your pic! Mine will likely look similar to the one from Ruger.

:) Stuart
 
thanks for reminding me, I've needed one of these for a while, used the steve's website mentioned, pay by (FRAUD ALERT), done in a few minutes.
 
Denich said:
I dont have (FRAUD ALERT), otherwise i would have done the same

CBSA has a massive hardon for brownells packages :(
Click to expand...

I bought one from Brownells too, one of the best shooting accesories I ever bought.
Hate to say it Denich but my stuff from Brownells rarely gets held up or opened by CBSA, they must have a hardon for you LOL! :p;)
 
You must log in or register to reply here.
Back
Top Bottom