MDT TAC21 and scopes

[nutmik]

Hi everyone,
For those of you who have Tac 21's, is anyone using a 30 mm tube/50mm objective scope ? If so, what rings are you using ?
I've got a 6-24x50 Sightron and a 6-24x50 Bushnell that I'm trying to decide on, I like TPS or Warne steel rings, but they both seem like they're going to be to small.
Any ideas ?
Thanks, Mike

 

[Jamie]

http://www.oneshottactical.com/Merc...neshot&Product_Code=FP-ADRX&Category_Code=MNT


this is what i use

 

[agilent_one]

Vortex ADR

 

[nutmik]

Thanks guys !

 

[c3pppo]

I have the Burris PEPR mount on mine, similar to the Vortex ADR, but somewhat less expensive. Works well.

 

[Skullboy]

Hi everyone,
For those of you who have Tac 21's, is anyone using a 30 mm tube/50mm objective scope ? If so, what rings are you using ?
I've got a 6-24x50 Sightron and a 6-24x50 Bushnell that I'm trying to decide on, I like TPS or Warne steel rings, but they both seem like they're going to be to small.
Any ideas ?
Thanks, Mike

I run a S&B PM-II with a 34mm tube and a 56mm objective lens with Badge high rings.......there is "Just" enough clearance if I leave the Butler Creek Scope cap off.........