Hey guys, I'm quite new to reloading but have read the whole Lee Reloading Manual and several articles online. My problem is: the manual I use doesn't have enough info for me to determine a correct receipe for the rounds I'm trying to load.
I have Berry's 9mm 124gr FP, Unique powder, CCI primers, used brass. I have already figured out that 1.070" is the MAX I can seat my bullets for them to fit the short freebore of my SP01 Shadow.
The powder charge for Unique is at 4.8gr in the book, but for a 125gr round nose bullet.
Problem is, should I reduce the charge in my case, because the bullets are FP seated deeper than the book says??? Thanks guys
I have Berry's 9mm 124gr FP, Unique powder, CCI primers, used brass. I have already figured out that 1.070" is the MAX I can seat my bullets for them to fit the short freebore of my SP01 Shadow.
The powder charge for Unique is at 4.8gr in the book, but for a 125gr round nose bullet.
Problem is, should I reduce the charge in my case, because the bullets are FP seated deeper than the book says??? Thanks guys


















































