KSG Compensator

[Green Monster]

Hi guys,
I Tried to order the KSG Enforcer Compensator by Carlson Comps through Brownells and they denied my order due to importation rules. I was wondering if anybody knew where I could purchase this compensator in Canada? Thanks..

 

[Dmitri]

There isn't anyone who sells them here... I tried to find one, but just gave up.

 

[stormtrooper1015]

I'll be holding out for the choke tube adapter... I want to introduce a load of shot to a Gobbler with the KSG this fall.

 

[brunobell]

I'll be holding out for the choke tube adapter... I want to introduce a load of shot to a Gobbler with the KSG this fall.

If your location is correct, you're gonna need one hell of a plug to hunt with the KSG in Ontario.

 

[stormtrooper1015]

That's what dowels are for.... Or a lot of dimes and batteries...

 

[Dmitri]

That's what dowels are for.... Or a lot of dimes and batteries...

I dont think it will be sufficient, you can just cycle through and spit out your empties and battaries... they want it more secure, so you have no way to load more then two shells during hunting.

So i thought of a way. Pick which mag you want to use (can use both too).
Then disassemble the gun, then take the front plate where the mag tube set bolts are, and drill and tap those bolts. then take two threaded rods 1/4 inch in diameter or smaller (same thread that you tapped the holes) screw in two rods in to the newlly drilled /tapped holes. Then assemble the gun back together, you will have the rods going into the mags limiting it to desired amount. The length of the rods will determin which mag you are using..

Let me know if it makes sense..




Yes choke adapter would be great, but barrel extension with chokes is even better.. or perhaps maybe an optional longer barrel from Kel-tec

 

[stormtrooper1015]

Exactly how would I cycle through to remove whatever plug material I use when it's behind the follower? The only way to remove the plug is to remove the end cap. We have been using dowels since I was a kid, and in a pinch, if we forgot them at home, we've put whatever we had on hand inside the magazine tube to block a third shell from being inserted.

 

[Dmitri]

Exactly how would I cycle through to remove whatever plug material I use when it's behind the follower? The only way to remove the plug is to remove the end cap. We have been using dowels since I was a kid, and in a pinch, if we forgot them at home, we've put whatever we had on hand inside the magazine tube to block a third shell from being inserted.

I'm sorry, I didn't realize that you ment putting it behind the follower.. I didn't take the KSG mag apart, but I remembe that once you unscrew those mag bolts, there is a threaded hole about 3/8 of an inch.. So no access through the front of the mag like on regular shotguns. So I guess there is a way to take out the follower from the back of the mag. Then you can stuff it with what ever you want.

Have you taken those mags apart? Is it easy to take out the follower?