OAL and the Ruger SR-22

[Imposter]

I've measured my SR-22 from the end of the handguard to the end of the MOE buttstock fully collapsed, and found it appears to be just over 26 inches.

With 660 mm being the OAL required, as I understand it, am I correct in understanding that this satisfy all requirements to stay non-restricted, regardless of what length barrel is installed?

 

[P12]

I believe that is correct.

 

[gump132]

Ya I've seen some people talking about putting a barrel in that is shorter than the handguard but it stays non-restricted due to the handgaurd to buttstock length.

 

[factionrr]

this is true. when i mounted my 8" dlask barrel on my sr22 it sat just short of the handguard without a muzzle device on it but still had the legal overal length required.

 

[hometownhero]

So long as its over 26 inches with the stock fully collapsed you can have whatever barrel length you want on it.

 

[kenp]

Seems ridiculous, do you mean to say that the oal is the end of the stock to the front of the handguard?? So if you put a shorter quad rail on the gun would become prohib?

 

[hometownhero]

Seems ridiculous, do you mean to say that the oal is the end of the stock to the front of the handguard?? So if you put a shorter quad rail on the gun would become prohib?

Only if you put a short barrel that makes the over all length shorter then 26 inches.

Its not that hard to understand guys. IT HAS TO BE 660mm(26") LONG. If the stock is 26" you can have a 2" barrel if you can find a premade one. If the stock is less then 26" then you need to make up the rest in the barrel length.

This info is all in the firearms act I suggest you read it

 

[factionrr]

This.... Barrel length has nothing to do with overal length if said barrel was made at that length. End to end how ever your setup gets you there at 26" makes it legal.

 

[RadMan]

I've measured my SR-22 from the end of the handguard to the end of the MOE buttstock fully collapsed, and found it appears to be just over 26 inches.

Thanks for posting this... I was just wondering the collapsed length without barrel... sounds like a potential PDW project to me!