buck shot and turkey choke?

I fired a few 00 buck rounds through a REM CHOKE HD super full predator/turkey choke. Pattern was awful. Seemed like too much constriction for the big pellets. #4 buck patterned very well with the same choke.

Darryl
 
I fired a few 00 buck rounds through a REM CHOKE HD super full predator/turkey choke. Pattern was awful. Seemed like too much constriction for the big pellets. #4 buck patterned very well with the same choke.

Darryl

You are getting foolish in your old age:) Like you I can get by with 4 buck no problem with a tight full but not 00
 
kinda figured that oh well will just stick with the imp cyl and follow them with a slug

Thanks

Wouldn't you rather have your first, best shot with the slug, then follow up with the buck if you (gods forbit) have to shoot a running, badly hit animal?
 
The general rue of thumb was larger buck shot more open choke.
Tighter patterns achieved usually with a mod or imp. Cyl rather than a full or tighter. As mentioned before pellet deformation was the cause.
I wouLd also worry about the choke tube threads getting pushed out into the barrel threads and jamming together. I've seen that.
The odd gun will shoot a decent pattern with a "full" but when I was patterning buck shot "modified " or "imp. cyl" shot better.
 
Have shot several deer with buckshot out of a mod. choke and they either dropped on the spot or went less than 40 yds.

Where I will be hunting I have never shot a deer father than 40 yds mainly due to bush conditions

Will shoot it this week to determine slug pattern if it is decent will consider slugs only

Another possiblity is rifled choke tube due they help a standard rifled slug or do they work better with sabot slugs
 
Last edited:
here is pattern at 25 yds turkey choke

IMAG0475_zps8d7c4ad6.jpg
 
If you use a tight choke for a tight pattern why not use a slug instead of buckshot?
My grouping for slugs has never been larger than any buckshot pattern I have seen, always figured buckshot was for times when over penetration was an issue.

Dan
 
Back
Top Bottom