Who has .321 copper jacketed bullets?

[daroccot]

For use in a tube mag lever.

Thanks.

 

[mmattockx]

Hornady makes two, a 165gr FTX and a 170gr FP.


Mark

 

[daroccot]

I know they make them, question is who has them/where do i buy them?

what about swaging an 8mm through a .321 die?

 

[bjmurata]

For use in a tube mag lever.

Thanks.

I was just on the Wholesale Sports website and they are showing for instance Speer .321 dia.170 gr. Flat Nose Softpoints for say a 32 Win.Special,if that is what you have.

 

[Wade Kirk]

Higginson's usually have the Hornady in stock. I've gotten 1x fired Win brass there before too.

 

[Andy]

I know they make them, question is who has them/where do i buy them?

what about swaging an 8mm through a .321 die?

Yes, you can size them down. I've taken 0.323 down to 0.316. Choose a bullet with a core bonded to the jacket. There will be some springback, the bullet's profile changes, and it lengthens a bit.

 

[daroccot]

I was just on the Wholesale Sports website and they are showing for instance Speer .321 dia.170 gr. Flat Nose Softpoints for say a 32 Win.Special,if that is what you have.

found em, thanks.

 

[CanuckWR]

Yes, you can size them down. I've taken 0.323 down to 0.316. Choose a bullet with a core bonded to the jacket. There will be some springback, the bullet's profile changes, and it lengthens a bit.

What swaging die do you use? I have been thinking of this method to feed some different bullets to my 32 win spc.

Thanks!