.410 in windsor

[antiqueguy]

anyone know of any .410 around here ive been buying hulls( i dont have a loader in .410) but id like some buck and cheap birdshot(i see cut shells in the future )

 

[eaglesnester]

shot is impossible to find everywhere in Canada yur spinnen yur wheels trying to reload shotgun hulls in any gage.

 

[antiqueguy]

shot is impossible to find everywhere in Canada yur spinnen yur wheels trying to reload shotgun hulls in any gage.

my hulls are for buckshot mostly and pest loads with #12 leadshot. im looking for some cheap stuff to do cut shells with

 

[CPitre]

Shot is readily available from a number of sources in Canada. I know wholesale sports has a variety of bird and buckshot. 000 works nicely in .410 but cut the pedals off the shot cup! Most .410 shotguns are full choke, so cutshells would disastrous as the outside diameter of the hull would be wider than the actual bore. I run Winchester .410 rifled slugs through my full choke heavy barrel with no problems and respectable accuracy so the buckshot is really a novelty but nice to have. You should be able to find hand loading systems for .410 or if you have money to burn there's the MEC 600 JR for about $300. At the cost of .410 shells now, the MEC would be worth it if you shoot enough.

 

[antiqueguy]

Shot is readily available from a number of sources in Canada. I know wholesale sports has a variety of bird and buckshot. 000 works nicely in .410 but cut the pedals off the shot cup! Most .410 shotguns are full choke, so cutshells would disastrous as the outside diameter of the hull would be wider than the actual bore. I run Winchester .410 rifled slugs through my full choke heavy barrel with no problems and respectable accuracy so the buckshot is really a novelty but nice to have. You should be able to find hand loading systems for .410 or if you have money to burn there's the MEC 600 JR for about $300. At the cost of .410 shells now, the MEC would be worth it if you shoot enough.

im not looking to reload here im looking for loaded rounds i have a mec but dont have a .410 set up for it what im looking for is cheap and plentyful bridshot loads that i can do cut shells with these are not going in my .410 shotgun but in a martini henry with a adapter for .410 shells ive said this twice in this thread alone

 

[tiriaq]

anyone know of any .410 around here ive been buying hulls( i dont have a loader in .410) but id like some buck and cheap birdshot(i see cut shells in the future )

my hulls are for buckshot mostly and pest loads with #12 leadshot. im looking for some cheap stuff to do cut shells with

im not looking to reload here im looking for loaded rounds i have a mec but dont have a .410 set up for it what im looking for is cheap and plentyful bridshot loads that i can do cut shells with these are not going in my .410 shotgun but in a martini henry with a adapter for .410 shells ive said this twice in this thread alone

What have you said twice in this thread alone?

OK, you want cheap shells so that you can ring them.

You're in Windsor. You are asking people who aren't in Windsor where you can find cheap .410 shells in Windsor. Have you tried the local phonebook?
Good luck.
.410 shells tend to be expensive. You might be able to get odds and ends at a gunshow.

I'm not going to recycle this thread, for the time being, but I am locking it.