new belt fed coming so now rpd????

[Mr.S]

I can see why someone would confuse the RPK and RPD when talking about models though. And the RPK definitely has that evil-looking AK safety that makes it a monster of wood and steel

 

[Mr.S]

Even accounting for price gouging if it ever reaches our side of the border, I'd still pick one up. 7.62x39 is cheap and belt feds are fun. Plus, it'll be fun to watch the fudds rage.

 

[TRich]

I would drop 200 to get one into the country for classification

 

[DeRK]

im in for putting money down aswell

 

[rally guy]

ok so we got 5 out of 15 peoples needed to get this done. all we need is 10 more and a importer to cash the deposit and get the ball rolling.

1. rally guy
2.strathconaman
3.rberresheim
4. TRich
5.DeRK
6. ihadamp5
7.caleb314
8.picatinny
9. jay
10.cdm123

moderator you are free to movethis tread.

 

[gutinater]

I may import one on my own for RCMP review if the importer will go for it, willing to take the risk

 

[Wantabe_ Warrior]

Does anybody know if DSA sells the AR stock lower receiver separate? I did a quick look on their site but didn't find it.

 

[ops_3329]

FRT on the full auto RPD from DSA lists the semi auto only as well. Prohibited

 

[rally guy]

FRT on the full auto RPD from DSA lists the semi auto only as well. Prohibited

you didn't read the tread did you!!?????

 

[ihadamp5]

I would drop 200 to get one into the country for classification

Me too, im in

 

[Caleb314]

Me 3

 

[Picatinny]

There has been over 6300 views - come on buck up.

Count me in!

 

[rally guy]

over halfway there guys were up to 8. see page 9 for the list.

 

[ops_3329]

The Full Auto RPD lists the DSA Semi auto only version as a variant of the full auto and given RCMP table sections past history they will use this as their reason to classify it prohibited so yes I did read the thread.

 

[North_Sylva]

Ok Guys.

DSA Inc. is not a company we typically deal with. I will however see if we can get something rolling. As someone else stated, I did take a look at the FRT and their is an entry for the DSA full auto RPD and the Semi auto carbine version is listed as a variant.

I will however do a little more digging and see if I can come up with something. Belts fed's are indeed hot at the moment.

Thanks,

 

[rally guy]

Ok Guys.

DSA Inc. is not a company we typically deal with. I will however see if we can get something rolling. As someone else stated, I did take a look at the FRT and their is an entry for the DSA full auto RPD and the Semi auto carbine version is listed as a variant.

I will however do a little more digging and see if I can come up with something. Belts fed's are indeed hot at the moment.

Thanks,

thank you!

 

[TRich]

Ok Guys.

DSA Inc. is not a company we typically deal with. I will however see if we can get something rolling. As someone else stated, I did take a look at the FRT and their is an entry for the DSA full auto RPD and the Semi auto carbine version is listed as a variant.

I will however do a little more digging and see if I can come up with something. Belts fed's are indeed hot at the moment.

Thanks,

Is there any other relatively, and i use relatively in a broad sense, inexpensive belt fed semis we could possible obtain?

 

[gutinater]

This is probably the cheapest one we could get and being in 7.62x39 it will be alot easier on the wallet than .308 or 30'06 m1919's or the mg34's in 8mm

 

[strathconaman]

Thanks I am still interested in putting some money up if cost is the deciding factor of an attempt to go forward with this. If there is a chance that will help.

 

[TRich]

This is probably the cheapest one we could get and being in 7.62x39 it will be alot easier on the wallet than .308 or 30'06 m1919's or the mg34's in 8mm

I know, just hoping there might be something else we could get incase this one doesn't work out... Chinese maybe?