Lets see some pics of your tactical shottys!
- Thread starter mmatt
- Start date
Love your shotgun rig setup day!
New super indestructible zombie approved bayonet (which is a ZT/Strider Bayonet in S30v, yes so hot I debated having ### with it, thought better of it and took a cold shower)
Manufactures blab :
Muzzle ring and latch plate: 4140 stainless steel, black-oxide coated
Blade: S30V stainless-steel, non-reflective, stonewashed finish, .24 in. thick
Textured G-10, Ranger Green Handle
Length: 7.5 inches long; Overall 12.5 inches (31.8 cm)
Weight: 1 lb. 3.4 oz. Or 1 lb. 10 oz. With sheath
New super indestructible zombie approved bayonet (which is a ZT/Strider Bayonet in S30v, yes so hot I debated having ### with it, thought better of it and took a cold shower)
Manufactures blab :
Muzzle ring and latch plate: 4140 stainless steel, black-oxide coated
Blade: S30V stainless-steel, non-reflective, stonewashed finish, .24 in. thick
Textured G-10, Ranger Green Handle
Length: 7.5 inches long; Overall 12.5 inches (31.8 cm)
Weight: 1 lb. 3.4 oz. Or 1 lb. 10 oz. With sheath
freddyfour
CGN Ultra frequent flyer
- Location
- Brant County, Ontario
Where did you get the SPX or did you build it yourself?
DragonFire
CGN Regular
- Location
- mid Canada
DF
My project.....
Rem 870 Wingmaster
Mesa 4 round side saddle
12.5" barrel with XS big dot
S&J no jam follower
Magpul SGA Stock in Flat Dark Earth
Houge Overmold rubber forend in Ghillie Tan
Scattergun tech front side mount sling plate
Condor speedy 2 point sling
I'm contemplating painting the rest of it in a dark earth shade of some sort.....
ALMOST my perfect pump, dig the colour too!!! I like Magpul stuff...but I cannot stand their shotgun butt stock!!! What choke you running? MOD?
It is a genuine SPX with a properly indexed barrel. A few of the barrels on some of the SPX's had the front sight tower misaligned from the factory causing some very gross accuracy issues.
I was one of the lucky few to get one from Milarm back some time ago when they got about 10 of them in.
First off for any Law Dawgs out there, the Tec-9 and my wife's Beretta Tomcat and my Gen IIIA nv scope were sold before we moved back to Ontario.
Have yet to see a Winnie 1300 on here so I'll toss this one out. Really had no need for another shotgun, but when I heard that rumor Winchester was going out of business 8 years or so ago, I ran out and bought one of the Connecticut made shotguns just to have. Got rid of that crappy heat shroud I put on there, am indifferent to the collapsible stock and have moved the red dot all the way up to the end of the rail. Would like to convert over to iron sights, but I may just save all the Canadian pennies I have to sell to some weird collector and spring for a Bennelli M4.......
Have yet to see a Winnie 1300 on here so I'll toss this one out. Really had no need for another shotgun, but when I heard that rumor Winchester was going out of business 8 years or so ago, I ran out and bought one of the Connecticut made shotguns just to have. Got rid of that crappy heat shroud I put on there, am indifferent to the collapsible stock and have moved the red dot all the way up to the end of the rail. Would like to convert over to iron sights, but I may just save all the Canadian pennies I have to sell to some weird collector and spring for a Bennelli M4.......
River runner
Regular
- Location
- Abbotsford BC
For all you guys running Express/DA barrels on your Wingmaster receivers, how do you get your barrel to stay on since there is no ball-detent on newer barrels? Do the sling plates with the ball detent work?
Yes. My sling plate with ball detent seems to work all right. But it didn't sit flat against the barrel ring. So to make it sit flat, I drilled a very small counter sink on the barrel ring right behind the ball detent and now the mag cap locks down nice and tight.
I purchased mine used with out the plate and it seemed to hold tight without the ball detent as well.....
Yes. My sling plate with ball detent seems to work all right. But it didn't sit flat against the barrel ring. So to make it sit flat, I drilled a very small counter sink on the barrel ring right behind the ball detent and now the mag cap locks down nice and tight.
I purchased mine used with out the plate and it seemed to hold tight without the ball detent as well.....
Last edited:
River runner
Regular
- Location
- Abbotsford BC
Thanks.
It's a cylinder bore or open choke. At least that what i was told when I bought it used here on the EE. I hope to get one for tightening up some skeet shot.
The stock is unorthodox looking.... but man is it ever comfortable to shoulder and fire. The ergos seem to work very well for me. The ability to customize the LOP and having integrated sling points on either side is a real bonus too.
To quote a friend of mine.... " the Magpul stuff is usually very functional.... most just get pissy because they didn't think of it first"
mosinmaster
CGN frequent flyer
Thank you for your response. It was very hard to get the answer! I heard of the metal crush washer and O-ring method, but that seemed too weak.
Tactical Pic UpDate...
The Benelli M4 is a step closer to being completed.
The Surefire M80 was finally added & YES it took forever.
It adds a bit of weight however the grip is considerably more solid - tactile because Magpul is now involved underneath the M80.
Will test the M4 if there is a cycling problem with the addition of the M80.
Very nice collection.
I also like the KISS, a little old school tactical if you will.
70's vintage Wingmaster (My very first gun ever owned, given to me when I was 14) with an 18.5" Express barrel threaded with chokes and a Police +2 mag extension from BBB
That is Effn beautiul. Wingmaster trumps any express tactical. IMO Where'd you get the 18.5 rem choke barrel?
Oh god do want... What kind of sight is on that??
