Pmag's don't fit in rifle properly...help please

garybusey

garybusey

Regular
Rating - 100%
3   0   0
Location
vancouver, bc
Ok So I got my new rifle in the mail today S&W M&P15 and along with it came 3 pmags and the rivet/pin on the pmags sticks out just far enough that it won't slide all the way in the magwell and lock in, the rivet hits the bottom of the magwell and wont go any farther. I'm a little pissed off to say the least. Do they need to be re-pinned with a lower profile rivet? any suggestions are appreciated. thanks.
20130328_152611_zps0f3adcbb.jpg

20130328_152708_zpsda9554c5.jpg
 
try it, I have done it before and had no issue with the rivet falling out, rivets are usually slightly domed, at this point you have nothing to lose, so try it on one
 
if it was pinned in the center then it would go in no problem because the magwell has a groove for rivets right in the middle it seems. I just dremel'd one down and it still doesnt fit...
 
Just don't take out the rivet the black helo and unmarked car's with be circling your house before it hits the ground.
 
Yeah I do I would just rather not f__k with it. I'm going to fastenal right now to see if I can get some of those fancy flush rivets they use on airplanes and stuff.
 
Why would you frack around with it... call the place you bought it and see what type of assistance they can provide. How much was the price tag with this artistic masterwork piece?
 
Send me the mags back and we will replace them if you can't get them to work. Please understand when we sell loose mags it is difficult to pin them so they work in every rifle. We will look after you my friend...


Best Regards,


Jason
IRUNGUNS
 
Hi Guys,

Just out of curiosity,

Do you guys rivet those mags in Canada or the US

Thanks
IRUNGUNS said:
Send me the mags back and we will replace them if you can't get them to work. Please understand when we sell loose mags it is difficult to pin them so they work in every rifle. We will look after you my friend...


Best Regards,


Jason
IRUNGUNS
Click to expand...
 
let us know how that worked for you, have the same prob with mine, Mine were flush enough to get seated, but some of the mags, they didnt drop free. They hung up just enough on the rivet, that I had to pull the mag out of the magwell.
PS...I didnt get mine from IRUNGUNS....
 
IRUNGUNS said:
Send me the mags back and we will replace them if you can't get them to work. Please understand when we sell loose mags it is difficult to pin them so they work in every rifle. We will look after you my friend...


Best Regards,


Jason
IRUNGUNS
Click to expand...
Thanks so much Jason I really appreciate your great customer service. I tried to to grind one of them down like you said and got it to the point where it would fit but it's not pretty and when I tried to see if it will fit more than 5 it bent because the head of the rivet is weak and it almost fits 6 now which scares me. The other 2 mags I left untouched in the package, it's just a shame that even the one that came with the rifle doesn't fit.
 
You must log in or register to reply here.
Back
Top Bottom