Jericho 941 parts

K

Kratos

CGN frequent flyer
Rating - 100%
309   0   1
Location
Edmonton, AB
I have a Jericho 941 FS steel frame in 9mm and it needs some new parts. I've contacted a few sponsors on CGN but none of them have parts. Does anyone know where I can get parts?

From this diagram I need part 28 which is a spring and part 50 which holds the hammer spring. Unfortunately I can't seem to find part numbers either.

image_zps59ed2728.jpg
 
I don't know where to get Jericho parts, but those 2 parts you need are the same parts on the CZ 75B, CZ parts are probablly easier to get than Jericho parts.
 
When I asked the question I was told to ask Freedom Ventures. They have lots of Tanfoglio parts. The Tanfoglio is very close to the 941. I have the baby eagle version.
I remember reading that Tangfolio actually produced some parts for the baby eagle not as sure about the Jericho.
 
tictactician said:
When I asked the question I was told to ask Freedom Ventures. They have lots of Tanfoglio parts. The Tanfoglio is very close to the 941. I have the baby eagle version.
I remember reading that Tangfolio actually produced some parts for the baby eagle not as sure about the Jericho.
Click to expand...

Baby Eagle and Jericho are the same gun, MRI markets the Baby Eagle in the U.S., IWI markets the Jericho 941 everywhere else.
 
Your best bet may be to email Magnum Research. Apparently they are very helpful and if they can't help you directly they will make sure they get you to someone who can. I would give this a try.
 
Well I asked freedom ventures and they have the sear spring (part 28) but can't get the hammer spring retainer (part 50), CRAFM said not anymore.
Magnum Research directed me to North Sylva and I'm now waiting for a response, I'll probably be directed to a dealer.
I'll use this pistol until it falls apart then buy another one, but parts would be the better option lol

Thanks for all the help! I'll report my findings either way
 
09outlander said:
Just out of curiosity, as I have 2 Jericho's, did these parts fail or were they lost?
Click to expand...

I bent the sear spring after a complete dissassembly and reassembly, the hammer spring retainer was broken after the reassembly, I'm pretty sure I hit the pin wrong that holds it in place.

Both parts still function and I put 200 rounds through my Jericho since the dissassembly. The trigger pull is better, if that's possible. Everything runs so much better after a thorough cleaning, even with damaged parts.
The only reason I want to get these parts is because I hate knowing they're broken, since they may cause problems down the road.
 
Yes hard to get parts for but i will put it against a M&P any day and still be ahead, if my 9mm ever breaks and i cant get parts im juss getting another one
 
tictactician said:
TDC you are a wealth of information.

Very helpful.
Click to expand...

transporteRR said:
I love your responses to everything negative
Click to expand...

You say negative, I prefer honest.

transporteRR said:
Yes hard to get parts for but i will put it against a M&P any day and still be ahead, if my 9mm ever breaks and i cant get parts im juss getting another one
Click to expand...

Please quantify your statement. I'm not following how replacing one failed pistol with the same make model is putting you ahead of anything?

TDC
 
You shouldn't have trouble getting parts, how long it will take is another matter, IWI/MRI, CZ and Tangfolio all have interchangable parts for the most part.
 
TDC said:
You say negative, I prefer honest.



Please quantify your statement. I'm not following how replacing one failed pistol with the same make model is putting you ahead of anything?

TDC
Click to expand...

Because i love it and if it fails its cause i been firing it lots, so far juss over 2000 no issue
 
TDC said:
You say negative, I prefer honest.



Please quantify your statement. I'm not following how replacing one failed pistol with the same make model is putting you ahead of anything?

TDC
Click to expand...
I 've got .40 Jericho and it is an amazing shooter and I believ that more and more people realize it . And the parts are interchangeable with CZ, if not sure , check with zahal.org
 
transporteRR said:
Because i love it and if it fails its cause i been firing it lots, so far juss over 2000 no issue
Click to expand...

That is not supporting evidence for your claim. That is your opinion and nothing more. How do you see your Jericho being ahead of an M&P? Its clearly an inferior design on many levels. And 2000 rounds isn't worth mentioning, get back to us when you're over 10,000 without issue.

TDC
 
You must log in or register to reply here.
Back
Top Bottom