CZ 513? What's the good,bad, and the ugly?

T

tuffbuff

Regular
Rating - 100%
38   0   0
Location
Alberta, WMU 357
Was snooping around today an accidentally bought a CZ 513 :cool: Just wondering any options on them and what owners think. So far I found the trigger is non adjustable and the stocks not checkered, other than that any major/minor differences than the pricier models?
Do they take any special rings or heights? I see 11mm, or will 3/8 Burris work?
As for a scope something around 100 bucks maybe and 2-7x32?
Also spare mags, approx price and any gun shop almost?
Particular brand of ammo the CZ's prefer at all in general?
Sorry for all the questions, but like I said - impulse buy, I usually research a bit before. Thanks
 
I shoot CZ 455 and its a wonderful gun. I dont know much about CZ 513 but from CZ's site, it seems its just a simple version of CZ 452. Main difference is the CZ 513 has non-adjustable trigger. For spare mags, check out Shooter's Choice dot CA. Have fun shooting your new rifle!!
 
Same gun as the 452 Lux except non-adjustable triggrt,no checkering and beech stock.
Use the Burris rimefire high rings and check RFC sight for much more info.

But they shoot great!!!! I use CCI in the four I have.

Wayne
 
As others have said nice rifle non adjustable trigger, the triggers from a 452 don't fit either according to the guys on rimfirecentral. I used a set of burris rings for a 527 for my 452 varmint, 3/8 rings don't work. The oddball dovetails is my main complaint about CZ.
 
lowe160 said:
Same gun as the 452 Lux except non-adjustable triggrt,no checkering and beech stock.
Use the Burris rimefire high rings and check RFC sight for much more info.

But they shoot great!!!! I use CCI in the four I have.

Wayne
Click to expand...

The high rings for bolt clearance or a 40 mm scope? I like using cci or federal ammo so good to know.

Thanks for the replys and info, I'll have to check out RFC also

I handled a few bolts with clips and after this one I couldn't put it back, lol!
 
The 452 American has the regular 3/8 dovetail for scope mounting.

I have 2, one in 22 LR, the other in 17 HMR
My 22 Magnum is a CZ also, but a 455.

I am very happy with my CZ rimfires....excellent shooters and esthetically pleasing.

Regards, Eagleye.
 
tuffbuff said:
The high rings for bolt clearance or a 40 mm scope? I like using cci or federal ammo so good to know.

Thanks for the replys and info, I'll have to check out RFC also

I handled a few bolts with clips and after this one I couldn't put it back, lol!
Click to expand...

Yes the High's should clear the bolt and the 40mm obj.

There is a chart with all this info at rimfirecentral on the cz forum in the sticky's!
 
You must log in or register to reply here.
Back
Top Bottom