XCR-L spare parts kit recommendations

We should have a few XCR-L spare parts leaving the US this week but nothing yet to start making up the spare parts kits that I am planning. The same kit for the M is also possible, but don't hold your breath!
 
Would the calibre specific kit be compatible with all XCR-L's you guys have sold in the past as well? Someone said something about older model firing pins being different?

Mr Wolverine said:
This is what we are proposing as an XCR Spare parts kit. In addition we carry in stock spare barrels, bolt assemblies etc which could always be added to a kit, comments please.

XCR Spare parts Kit

1 Ejector
2 Ejector bolts
2 Ejector lock washers
1 Extractor
1 Extractor spring
1 Extractor detent
3 Main pin clips
1 Hammer axis pin
1 hammer axis pin clip
1 Bolt catch (old or new Style)
1 Bolt catch spring
1 Bolt catch foot
1 Bolt catch foot bolt
1 Trigger spring
1 Hammer spring
1 Disconnector spring
1 Firing pin
1 Firing pin spring
1 Firing pin coil pin
5 Recoil buffers
1 Case deflector (Caliber specific)
1 Case deflector bolt
1 Gas Valve (Caliber specific)
2 Barrel retainer bolts
1 Recoil spring
Click to expand...
 
Mikeschurman said:
Maybe I missed something here, but what would you need all the spare parts for? Is the xcr that unreliable or prone to failures that we need to stock spare parts for it?
Click to expand...

It is more to do with this being a unique rifle, that shares few parts with any existing rifle. So all parts come from RA, not like an AR-15 where you can run to the nearest gun store for components. Everything comes from Robinson Arms, Easier to have the main spare parts handy, then to have a rifle go down over a $2 spring. If you have spare parts you can take care of it.
 
gh_defiant said:
It is more to do with this being a unique rifle, that shares few parts with any existing rifle. So all parts come from RA, not like an AR-15 where you can run to the nearest gun store for components. Everything comes from Robinson Arms, Easier to have the main spare parts handy, then to have a rifle go down over a $2 spring. If you have spare parts you can take care of it.
Click to expand...

This^^^
 
any eta on the xcr-L parts kits? I have a bunch of things on my "to buy" list, wanna get it all in one go, save on the shipping...
 
Geer_Hoor said:
I may be beating a dead horse here, but I think there are a number of potential buyers for shorter barrels for the various XCR's, namely 11" or 12" for the "L" platform.
Click to expand...

I Think the 16 inch light barrels are more realistic, and more in demand as they are not NFA items so Rob Arms could just send em over no problem. As for the 11/12 inchers and 14.7 they are going to need an export permit and will probably not be exported.

sprint said:
I have seen some notions floated around about how making short barrels available might somehow enable someone to defy the law.

Sounds like absolute posh to me. The entire upper is:
  • interchangeable
  • commonly available in mini and micro variations with short assed barrels
  • not the registered part
Click to expand...

Sounds like thought crime, TV_Press Pass has a 15 inch barrel for his Tavor, so he just registers it and de-registers it when he switches back. Nobody goes through the trouble of obtaining a PAL just to skirt the law.
 
This is what makes up our XCR-L Spare parts kit. In addition we carry in stock spare barrels, bolt assemblies etc XCR Spare parts Kit for the M will follow in a few months.

1 Ejector
2 Ejector bolts
2 Ejector lock washers
1 Extractor
1 Extractor spring
1 Extractor detent
3 Main pin clips
1 Hammer axis pin
1 hammer axis pin clip
1 Bolt catch (old or new Style)
1 Bolt catch spring
1 Bolt catch foot
1 Bolt catch foot bolt
1 Trigger spring
1 Hammer spring
1 Disconnector spring
1 Firing pin
1 Firing pin spring
1 Firing pin coil pin
5 Recoil buffers
1 Case deflector (Caliber specific)
1 Case deflector bolt
1 Gas Valve (Caliber specific)
2 Barrel retainer bolts
1 Recoil spring

These will be going up on our web site in the next few days, I am currently making the kits up. There will be six different kits. You need to order by caliber (5.56, 7.62x39 or 6.8) and specify old or new bolt catch. The old bolt catch is smaller diameter than the new one, the old style is round the new style is fluted. I will get a photo posted here showing the difference ASAP. Price for all kits is $255.00
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom