CZ 858 wierd parts
- Thread starter Carbon Mechanic
- Start date
Does any one know what these parts are for and what is there worth in Canada???
Looks like to me the trigger assembly group inside the lower receiver of the CZ 858......
Bingo but how much are they worth?
And will it fix the evil gremlin?
I would never put them in a gun. May be worth alot to sell them to someone that likes to do illeagle things but wouldnt be a gremlin fix. If your talking about something to fix the sear and trigger alignment theres a better fix. Just need a thin shim for the sear.
I'm not familiar with that method of fixing the gremlin. Can you elaborate?
The sear assembly, on the side where the pin comes in through the assembly. Take a small piece of a brass case that is very thin. Like a 9mm case, make it into the size of a small washer. Make the hole the size of the smaller part of the pin for the sear. Install this washer between the sear assembly and the step in the pin that holds the sear. This will help with the problem some of the cz858s have with the trigger assembly not catching the sear. Takes the extra play out of the sear that causes it to move out of place. Someone on youtube shows how to fix it.
Ya thatz what I was thinking. I thought that you could install the disconnector and it would fix the problem of the sear not resetting. As we all know that the big blob of metal around the safety prevents the fun switch feature.
As for Rick911 parts them self will not land you in jail but turning a firearm into full auto will and no one was talking about that.
This thread was started to see if some of these parts are available in Canada and what it would cost although I like sandwman27 idea better & it's cheaper
Did you not know that it was a FA trigger assembly?
Such an import is illegal in this country, and even more illegal to install it in a rifle.
Asking what it's worth is like asking what a kilo of heroin is worth, whats the point?
Big time no no.
And it hurts the firearms community to have an FA assembly installed in a rife for very obvious reasons.
But hey we're all adults here, you can use your own judgement to do what you want.
Such an import is illegal in this country, and even more illegal to install it in a rifle.
Asking what it's worth is like asking what a kilo of heroin is worth, whats the point?
Big time no no.
And it hurts the firearms community to have an FA assembly installed in a rife for very obvious reasons.
But hey we're all adults here, you can use your own judgement to do what you want.
No I am not talking about the full auto set-up. I was referring to that piece of metal attached to the trigger that goes forward. I call it the "safety disconnector" but do not know its official name so I thought that some one on here would. That and plus how much they retail for in Canada and were you can purchase one here in Canada.
But like usual this site let me down again and this post quickly de-railed into far off la-la land about some how I want to turn the rifle full auto and some how having spare parts that are found in parts kits and those old gun smith treasure chests that they used to sell years ago some how have turned illegal.
Just want to thanx sandwman27. Most helpful post and worked like a dream
Does any one know what these parts are for and what is there worth in Canada???
As far as I know full auto parts are in fact legal... It's not hard to find a sten parts kit or many other full auto parts. They are just parts after all. In fact I'm pretty sure those vz-58 armorers kits had FA parts in them.
If I'm wrong maybe somebody could point me to the legislation that says parts are illegal.
If I'm wrong maybe somebody could point me to the legislation that says parts are illegal.
Ok, I am missing something. I do not support the illegal modification of firearms. Nor do I EVER want to try it. Its my understanding that a rifle goes to the RCMP lab for months even years to insure it can not be made full auto.. case in point T-97. So how would changing something as simple as a trigger group make something F.A.? Feel free to PM me instead of posting on the public board if you want.
That's because a dissasembled magazine is still a magazine... In order for it to be a full auto firearm you would need the gun, namely the reciever.
The only controlled part that I can think of of the top of my head is pistol barrels shorter than 107mm.
Last edited:
