What Mr. Wolverine doesn't know won't hurt him!

Reginald said:
I'm starting to fall in love with that little shiny Titan now though... are those SAM 106mm barrels too?
Or, if you don't know, I'll call the store tomorrow...?
Click to expand...

They are the 106mm barrels. The use a bushingless barrel on them One word of advice if you are looking at the titan is to get a recoil buffer for it. They use a little different setup than the rest of the pistols.
 
Grumpy Wolverine said:
They are the 106mm barrels. The use a bushingless barrel on them One word of advice if you are looking at the titan is to get a recoil buffer for it. They use a little different setup than the rest of the pistols.
Click to expand...

Interesting and thank you for the info... still dreaming as of now... I may have just bought another rifle too... terrible this CGN is!!!
Gonna sleep on it and call the store tomorrow.
Cheers!
 
if anyone is interested, check out these wild 1911 grips. i know it says paintball but they also make gun grips for 1911, sig p238, and ruger 22/45.http://www.stingerpaintballdesigns.com/SPD_Custom_Paintball_Marker_and_1911_Pistol_Gun_Grips.htm here is a sample.
Howling20Wolves20Gun201911_zps51c82eff.jpg
Wolves20Gun201911_zps69fe3ffa.jpg
 
Last edited:
just brought mine to the range today and noticed it was jamming cause of the slide stop being to losee. the detent is not touching the slide stop so its moving around freely.
anyone know what to do?
2013-10-05023312.jpg
 
adrian118 said:
just brought mine to the range today and noticed it was jamming cause of the slide stop being to losee. the detent is not touching the slide stop so its moving around freely.
anyone know what to do?
2013-10-05023312.jpg
Click to expand...

Looks like the plunger spring is stuck or to short, no problem to mail you a new one. Try taking the spring and stretching it, that may give you a short term fix, let me know how you make out.

And yes I am back!!
 
Mr Wolverine said:
Looks like the plunger spring is stuck or to short, no problem to mail you a new one. Try taking the spring and stretching it, that may give you a short term fix, let me know how you make out.

And yes I am back!!
Click to expand...

Just compared it to my other 1911. It looks like the spring and the plunger are too short. A new one would be very very much appreciated :D.

Also. Welcome back!
 
That's what I thought. I've been trying all different ways. It's not working. The barrel looks too thick for the slide. I have no idea how they got it in there
 
Yup. It's well lubed. I tried putting extra lube on it and wiggling it out but no luck. I sent an email to john at wolverine. Hopefully I can exchange it.
 
You must log in or register to reply here.
Back
Top Bottom