calgarycanada
CGN Regular
- Location
- Calgary, Canada
How long is the second scope(over all length), 3.5X22
Last edited:
Type 97 Sight Rail (Solid type) range report
- Thread starter petermoo999
- Start date
How long is the second scope(over all length), 3.5X22
This is our take at Sino-Soviet Relations
Russian VOMZ PO Scopes, compact, light and build like a tanks
we have few in stock
corwin-arms.com
Do they come with the rings.??
And what type of sling is that also I like it!
I'd like to quote 20 images and only add a 3-word reply! Can I ? 
Seriously, guys, you don't need to quote all the images in a pic-heavy post, just adds a lot of unnecessary clutter and makes the thread hard to read.
Seriously, guys, you don't need to quote all the images in a pic-heavy post, just adds a lot of unnecessary clutter and makes the thread hard to read.calgarycanada
CGN Regular
- Location
- Calgary, Canada
I'd like to quote 20 images and only add a 3-word reply! Can I ?
There, fixed it, just for you buddy.
Good advice though
Managed to work something out that SHOULD do the trick (sighting in tomorrow). 2" forward mount, moved so the back screw is between the rear-most and second mounting screws on the CanAm rail and the front one is just in front of the Chinese rail. Some flex but should return to the same position if bumped (the Chinese rail itself is designed with a bit of flex in mind). This moved it forward about 1", which means it's only about 1/2" too far back (still compromised for stability so most of the mount clamps above the Chinese mount), which I can deal with. Can't wait for my "Magpul" cheekpiece to arrive so I can work on mounting it with some velcro straps, but for now, low chin weld it is.
The Arkansas elevation will be HUGE.. When it was sitting on low rings and about 1" back of where it is, zeroed at 50, it was -3" at 20, +5" at 100 and then it should start dropping very soon.. Still good enough to stop the Japanese invader should they start looking China's way again
Which Magpul Cheek riser did you get, and did it install properly?
I'm thinking of doing the same.
More details to come when it arrives.. It's supposed to be a Magpul knockoff for a CTS stock.. Will require a bit of fabbing to work. Thinking 4 slots, 2 velcro straps, and that way it's removable. That gives me 2 advantages:
1) If I use a Clobb rail I can just rip the velcro off and go to the irons if something happens with my optics
2) No permanent mods to the rifle
